ML9040A Datasheet, PDF (1/49 Pages) OKI electronic componets – DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER

PEDL9040A-03
¡ _¡ Semicond_Suc_etor_miconductor
PreviTohuiss^Mvve^Lerr9ss^P0iioo^4Enn^0D::^ALSO^-e^{9Acp0tx..4x220/00A-00B-P000xre3xliminary}
ML9040A-Axx/-Bxx
DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT
SEGMENT DRIVER
GENERAL DESCRIPTION
The ML9040A-Axx/-Bxx is a dot matrix LCD controller which is fabricated in low power CMOS
silicon gate technology. Character display on the dot matrix character type LCD can be
controlled in combination with a 4-bit or 8-bit microcontroller. This LSI consists of 16-dot
COMMON driver, 40-dot SEGMENT driver, display data RAM, character generator RAM,
character generator ROM and control circuit.
The ML9040A-Axx/-Bxx has the character generator ROM that can be programmed by custom
mask. The ML9040A-A01/-B01 is a standard version having 160 characters with lowercase (5
x 7 dots), and 32 characters with uppercase (5 x 10 dots) in this ROM.
FEATURES
• Easy interface with an 8-bit or 4-bit microcontroller.
• Dot matrix LCD controller/driver for lowercase (5 x 7 dots) or uppercase (5 x 10 dots).
• Automatic power ON reset.
• COMMON signal drivers (16) and SEGMENT signal drivers (40).
• Can control up to 80 characters when used in combination with MSM5259.
• Character generator ROM for 160 characters with lowercase (5 x 7 dots) and 32 characters with
uppercase (5 x 10 dots).
• Character patterns are programmable by character generator RAM. (Lowercase: 5 x 8 dots,
8 patterns, uppercase: 5 x 11 dots, 4 patterns).
• Built-in oscillation circuit to connect with external resistor or ceralock.
• 1/8 duty (1 line; 5 x 7 dots + cursor), 1/11 duty (1 line; 5 x 10 dots + cursor), or 1/16 duty (2
lines; 5 x 7 dots + cursor), selectable.
• Clear display even at 1/5 bias, 3.0V LCD driving voltage.
• LCD driving waveform
ML9040A-Axx: A mode
ML9040A-Bxx: B mode
• Package options:
80-pin plastic QFP(QFP80-P-1420-0.80-BK)(Product name: ML9040A-Axx/-BxxGA)
Al pad chip
(Product name: ML9040A-Axx/-BxxWA)
xx indicates code number.
01 indicates standard code number.
1/49