MBF9045BB Datasheet, PDF (1/10 Pages) OKI electronic componets – SAW Antenna Duplexer (700 to 1000 MHz)

FEDW9045BB-01
1_{Semiconductor}
MBF9045BB
SAW Antenna Duplexer (700 to 1000 MHz)
This version: Sep. 2001
GENERAL DESCRIPTION
The MBF9045BB is the SAW antenna duplexer for the frequency range of 700 to 1000 MHz.
This SAW Duplexer integrates RF filters at Tx and Rx side, and matching circuit into PKG. This helps to save the
space and weight greatly in the target application such as mobile telephone.
This SAW Duplexer has very low insertion loss by using high quality package.
Due to high harmonics characteristics, total number of components at RF circuit can be minimized.
Thanks to high isolation performance, high sensitivity can be expected. Low insertion loss at Tx saves the power
consumption of mobile telephone which prolong the battery life.
FEATURES
• Complying Standard AMPS, IS-95, IS-136
• Small package: 5mm x 5mm & less than 1.8 mm in height
• PKG I/O Impedance: 50 Ω
PRODUCT DESCRIPTION
Package Type
MBF9045BB
45B
Rx
YXXX
Tx
Construction
ANT
Cap
Glue
Wire
Package
Chip
Die Paste
Cross-section of MBF9045BB
1/10