TP810PW10R0JE Datasheet, PDF (1/2 Pages) Ohmite Mfg. Co. – High Energy Thick Film on Alumina Substrate

Thick film
Radial
TP Series
High Energy
Thick Film on Alumina Substrate
TP Series high energy resistors offer the user the
benefits of non-inductive performance and high
power density. As an added feature, they provide
the impulse energy capability normally associated
with wirewound or composition resistors. Double-
sided screen printing of pulse-tolerant thick film ink,
coupled with a sophisticated scan-cut laser trimming
process, maximize the energy withstanding capabili-
ties of the TP Series.
F e at u r e s
• High-Temp Terminal
Construction
• Wide Resistance Range
• Low Inductance (50nH-
100nH)
• High Power Density
• Easy to install.
PC-mountable
c h a r a c t e r i st i c s
Substrate Alumina
Resistor Thick Film
Coating Glass
Terminals Solder Plated Phosphor Bronze
Thermal Conductivity 20 Watts/Meter/°C
Temperature Coefficient 1 to 100Ω: 100 ppm/°C
101Ω and up: 50 ppm/°C
Tolerance ±1%, ±5% and ±10%
Power Rating Based on 25°C free air
Resistance Range 10 ohms to 1M ohm. Consult factory for other values
Maximum Operating Voltage 350 VAC, 500 VDC through glass, 1000 VAC, 1500 VDC through substrate
Energy Rating 100J: 100ms pulse with 100uF capacitor, not to exceed 1500 volts
Derating 100% @ 25°C to 0% @ 180°C ambient.
Pulse
V ^{E = 12–CV2}
t = RC
t
E = Energy
(joules)
t = Time
(seconds)
V = Voltage
(volts)
R = Resistance (ohms)
C = Capacitance (farads)
(±.020 in. / ±.508mm)
DIMENSIONS
1.00"/25.40mm
0.040" / 1.02 mm
1.00"/25.40mm
0.020"
0.51mm
typ.
0.150"
3.8 mm
ref.
0.240" /
6.10 mm
0.800"
20.32mm
0.070" /
1.78 mm
0.300" /
7.62 mm
0.040" /
1.02 mm
typ.
0.200" / 5.08 mm
0.050" / 1.27 mm dia. finished pins
O R D ERI N G I N F O R M A T I O N
Pin spacing
8 = 0.80"
Tolerance
K = 10% RoHS
J = 5% compliant
TP810PW4K50JE
Series Power Rating Package
10 = 10 watts PW = wraparound
terminal
Resistance Value (Ω)
10R0 = 10.0
2K00 = 2,000
45K0 = 45,000
Standard part numbers for TP series
TP810PW10R0JE
TP810PW20R0JE
TP810PW50R0JE
TP810PW100RJE
TP810PW470RJE
TP810PW1K00JE
TP810PW4K70JE
TP810PW10K0JE
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax [phone] • www.ohmite.com • [e-mail]