TGHHVR100JE Datasheet, PDF (1/1 Pages) Ohmite Mfg. Co. – 120 and 200 Watt SOT227Package Thick Film Power

Due to their non-induc-
tive design, these resistors
are ideally suited for high-
frequency and pulse-load
applications. Available in 120-
or 200-watt sizes, this resistor
is designed for direct mount-
ing onto a heatsink. Popular
applications include variable
speed drives, power supplies,
control devices, telecom, robot-
ics, motor controls, and other
switching designs.
SPECIFICATIONS
Material
Heat Sink: Nickel-plated copper
Contacts: Nickel-plated copper
Substrate: Al203 (96%)
Molding Compound: High-per-
formance epoxy, compliant to
UL94-V0
Terminal Nuts: American standard
303 stainless steel
Electrical
Resistance Range: 0.1Ω to 1MΩ
Tolerance: ±5%
Temperature coefficient:
±250ppm (at +105°C ref. to
+25°C)
Max. Work.Voltage: 500V (up to
1,000V on special request)
Power Rating at 85°C: 120W (see
derating)
Partial Discharge: up to
2,000Vrms/80 pC
Voltage Proof: Dielectric Strength
up to 4,000V DC against ground
TGH Series
120 and 200 Watt SOT227Package
Thick Film Power
0.158"
(4.0mm)
1.501" ±0.004
(38.1mm ±0.1)
1.235" ±0.014
(31.35mm ±0.35)
0.315" ±0.008
(8.0mm ±0.2)
3
4
0.473" ±0.008
(12.0mm ±0.2)
0.355" ±0.004
(9.0mm ±0.1)
0.079" ±0.002
(2.00mm ±0.05)
0.165" ±0.004
(4.2mm ±0.1)
0.980" ±0.021
(24.9mm ±0.5)
0.032" ±0.002
(0.80mm ±0.05)
0.500" ±0.004
(12.7mm ±0.1)
0.165" ±0.004
(4.2mm ±0.1)
1
2
0.591" ±0.004
(15.0mm ±0.1)
1.190" ±0.004
(30.2mm ±0.1)
M4 0.209"
(5.3mm)
Heat Resistance to Cooling
Plate: Rth <0.35 K/W
Capacitance/Mass: 45pF
Working Temp. Range: -55°C to
+155°C
Max. Torque for Base Plate
(static): 1.5 Nm
Max. Torque for Contacts
(static): 1.3 Nm. M4 screws (not
included)
Derating (thermal resistance):
2.86W/°K (0.35°K/W)
DERATING
Type: H L
100
120 200
80
96 160
60
72 120
40
48 80
20
24 40
0
00
0 25 50 85 100 125 150 175
Bottom-case Temperature, °C
Best results can be reached by
using a thermal transfer compound
with a heat conductivity of better
than 1W/mK
CONFIGURATIONS
(per package)
Config. 1
Config. 2
4
1
21
STANDARD PART NUMBERS
Ohms 120 Watt TGHH
0.1 TGHHVR100JE
0.5
1 TGHHV1R00JE
5 TGHHV5R00JE
10 TGHHV10R0JE
25
33 TGHHV33R0JE
50 TGHHV50R0JE
100 TGHHV100RJE
150 TGHHV150RJE
500 TGHHV500RJE
680 TGHHV680RJE
1K TGHHV1K00JE
5K TGHHV5K00JE
10K TGHHV10K0JE
200 Watt TGHL
TGHLVR100JE
TGHLVR500JE
TGHLV1R00JE
TGHLV10R0JE
TGHLV25R0JE
TGHLV33R0JE
TGHLV100RJE
TGHLV150RJE
TGHLV500RJE
TGHLV680RJE
TGHLV1K00JE
TGHLV5K00JE
TGHLV10K0JE
ORDERING INFORMATION
Configuration
V = config. 1
X = config. 2
E = RoHS compliant
TGHHV1R00JE
SOT 227 Series
Wattage Resistance Value
H = 120W Example:
L = 200W R500 = 0.500Ω
1R00 = 1Ω
250R = 250Ω
1K00 = 1,000Ω
10K0 = 10,000Ω
Tolerance
J = 5%
Check product availability at www.ohmite.com
Subscribe to our
New Product Bulletin at
ohmite.com
Ohmite Mfg. Co. 1600 Golf Rd., Rolling Meadows, IL 60008 • 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax [phone] • www.ohmite.com • [e-mail] 61