TAP600J5R0E Datasheet, PDF (1/1 Pages) Ohmite Mfg. Co. – 600 Watt Heat Sinkable Planar

Ohmite’s TAP600 delivers 600
watts of reliable power to a
variety of power conditioning,
power transmission, and power
control applications. These
resistors can be designed for
liquid or air cooled heat sink
systems. Applications include
variable speed drives, power
supplies, robotics, motor con-
trol, and other control devices.
FEATURES
• Dielectric Strength up to 12KV
• Special Design for Low
Inductance and Capacitance
Values
• Easy Termination to Contacts
with M5 Screws (not included)
SPECIFICATIONS
Electrical
Resistance Values: 0.5Ω to
100KΩ
Resistance Tolerance: ±10%
Std., 5% available on request.
Temperature Coefficient:
±150ppm/°C (others upon
request)
Maximum Working Voltage:
5,000V DC, higher voltage on
request, not exceeding max.
power
Power Rating: 600W at 70°C heat
sink temperature or 85°C bottom
case temperature. This value
is only valid by using a thermal
conduction to the heat sink Rth
-cs<0.025°C/W.
The value can be reached by
using thermal transfer com-
pound with a heat conductivity
of 1w/mk. The flatness of the
cooling plate must be better than
0.05mm overall. The roughness
of the surface should not exceed
6.4µm.
Dielectric Strength Voltage:
6k Vrms, 50Hz, 1min standard;
up to 12k Vrms available
Single Shot Voltage: Up to 12KV
Normwave (1.5/50 µsec)
Insulation Resistance: 10GΩ
min. at 500V
Creeping Distance: 42mm min.
Air Distance: 14mm min.
Inductance: ≤80nH
Capacitance/Mass: ≤110pF
Capacitance/Parallel: ≤40pF
Operation Temperature:
-55°C to +150°C
Max. Torque for Contacts: 2 Nm
Max. Torque for Mounting: 1.8
Nm
Derating (thermal resist.):
8.73W/°C (0.115°C/W)
TAP600 Series
600 Watt Heat Sinkable Planar
ø0.159–0.169"
(4.05–4.3mm) _{2.331–2.394"}
*Also C_L to C_L
dimension for
(59.2–60.8mm)
mounting holes
øM5
occ. Din
*2.236–2.252"
(56.8–57.2mm)
1.331–1.346"
(33.8–34.2mm)
0.689–0.728"
(17.5–18.5mm)
2.527–2.591"
(64.2–65.8mm)
1.409–1.425"
(35.8–36.2mm)
0.295–0.335"
(7.5–8.5mm)
1.240–1.279"
(31.5–32.5mm)
II
0.177–0.216"
(4.5–5.5mm)
1.161–1.201"
(29.5–30.5mm)
PULSE-FORMS
E-function, time between two pulses: 1 sec.
10,000,000
1,000,000
100,000
10,000
1000
100
0.001 0.01 0.1
100,000
1
10
100
Time (ms)
10,000
1,000
1,000 10,000 100,000
0.571–610"
(14.5–15.5mm)
PERFORMANCE DATA
Test
Short Time Overload
Humidity Steady State
Temp. Cycling
Shock
Vibrations
Load Life 1,000 Cycles
Terminal Strength of Contacts
Method
Typical Results - ΔR
1000 W/10 Sec. @ 70°C
0.4%
56 Days/40°C/ 95°C
0.25%
-55/+125/5 Cycles
0.20%
40g/4,000 Times
0.25%
2 - 500Hz/10g
0.25%
Pn 30 min. ON/30 min. OFF
0.40%
200N
0.05%
DERATING CURVE
120
720
100
100
600
10
80
480
1
60
360
ORDERING INFORMATION
RoHS compliant
Non-compliant version
40
unavailable
240
�����������
20
120
Style
Tolerance
J = 5%
K = 10%, Std.
L = 20%
Resistance
1 Ohm = 1R0
10 Ohm = 10R
1000 Ohm = 1K0
Check product availability at www.ohmite.com
0
0
0
25
50
75 100 125 150 175
Heat Sink temperature, °C
STANDARD VALUES FOR TAP600 SERIES
1.0
15
500
2.0
30
1000
3.0
50
2500
4.0
75
3000
5.0
100
5000
10
300
10,000
Ohmite Mfg. Co. 1600 Golf Rd., Rolling Meadows, IL 60008 • 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax [phone] • www.ohmite.com • [e-mail] 65