RES-EY Datasheet, PDF (1/2 Pages) Ohmite Mfg. Co. – Suitable for automatic machine insertion

EY Series
Ceramic Composition
10% Tolerance
F e a t u r es
• Suitable for automatic machine insertion
• Ideal for high energy/high peak power applications
• Products with lead-free terminations meet EU
RoHS requirements
• Higher reliability against disconnection compared
to wirewound resistors and film resistors
S E R I E S S P E C I F I C AT I O N S
Series Watts max.* Resistance range
EY
2.5
10Ω - 390KΩ
* at 25°C. **For a single impulse.
Tolerance Joules max.** Max. working volts
±10%
400
550
c h a r a c t e r i t ics
Test Condition
Requirement ∆R ±( +0.05Ω)
Resistance
Resistance
3.3Ω~8.2Ω
10Ω~82Ω
100Ω~390kΩ
Measurement
voltage
0.3V
25°C
1.0V
3.0V
Within regulated to tolerance
TCR +25°C/-40°C and +25°C/+125°C <100Ω: -900+/- 300ppm
≥100Ω: -1200+/-300ppm
Voltage Coefficient Rated voltage and rated voltage 0~-0.05%/V
x 10% (Apply for over 1kΩ)
Overload Rated voltage x 2.5 or maximum ±2% limit; 0.4% typical
overload voltage for 5s, which-
ever less
Single impulse
rating
The resistor mounted to the test
circuit at right. Single impulse
test of 10 ohm resistor resulting
in 3.3ms.
±5%
Protection
resistor
DC
500 volts
C=3300uF
Rx
Power Rating Based on 25°C free air rating
TCR -900±300: R<100Ω
-1200±300: R≥100Ω
Voltage Abs. max. working: 550V
Abs. max. overload: 1100V
Abs. max. pulse: 25kV
Operating -40°C to +110°C
Temp. Range
Tolerance ±10% standard
Derating
100
80
25°
60
40
Resistance to sol-
dering heat
Rapid change of
temperature
Moisture resis-
tance
Load life
Resistance to
Solvent
Pulse Tolerance
350°C±10°C, 3.5s±0.5s
-40°C(30min.)/+85°C(30min.), 5
cycles
40°C±2°C, 90%~95%RH,
1000h, 1.5h ON/0, 5h OFF
cycles
40°C±2°C, 1000h, 1.5h ON/0, 5h
OFF cycles
Dipping in IPA or Xylene for 3
minutes and leaving for 10 min-
utes after removing drops,
then brushing 10 times.
200V, 112 Joules, 10000 cycles,
5600uf capacitor discharge, 26
second rest time
±2% limit; 0.8% typical
±2% limit; 0.4% typical
±5% limit; 0.6% typical
±5% limit; 0.4% typical
No abnormality in
appearance. Marking
shall be easily legible.
±2%
20
0
-40 -20 0 20 40 60 80
110°
Ambient Temperature, °C
(continued)
54
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax [phone] • www.ohmite.com • [e-mail]