|
RES-89 Datasheet, PDF (1/2 Pages) Ohmite Mfg. Co. – High power to size ratio | |||
|
89 Series
Metal-Mite® Aluminum Housed
Axial Terminal Wirewound, 1% Tolerance
The 89 Series is a high-performance axial type
resistor. These molded-construction metal-housed
resistors are available in higher power ratings than
standard axial resistors and are better suited to with-
standing vibration, shock and harsh environmental
conditions.
The 89 Series Metal-Mite® resistors are aluminum
housed to maintain high stability during operation
and to permit secure mounting to chassis surfaces.
The metal housing also provides heat-sinking
capabilities.
F e at u r e s
⢠High Stability: ±0.5% âR
⢠High power to size ratio
⢠Metal housing allows chassis mounting and pro-
vides heat sink capability
Series specifications
Series Wattage
Ohms
Voltage
805
5
0.10-25K
210
810
10
0.10-50K
320
825
25
0.010-75K
520
850
50
0.005-100K 1170
Non-Inductive versions available. Insert âNâ before tolerance code.
Example: 850NF560
Characteristics
Housing Metal, anodized aluminum
Internal Coating Silicone
Core Ceramic
Terminals Solder-coated axial
Derating Linearly from 100% @ +25°C to 0% @ +275°C.
Tolerance ±1% and ±5% (other tolerances available).
Power rating Rating is based on chassis mounting area and temperature stability. Proper heat sink as follows: 5W and
10W units, 4â x 6â x 2â x .040â Aluminum chassis; 25W units, 5â x 7â x 2â x .040â Aluminum chassis;
50W units, 12â x 12â x .059â Aluminum panel.
Maximum ohmic values See chart.
Overload 5 times rated wattage for 5 seconds.
Temperature coefficient Under 1Ω: ±90 ppm/°C; 1 to 9.99Ω: ±50 ppm/°C; 10Ω and over: ±20 ppm/°C.
Dielectric withstanding voltage 5W and 10W rating,1000 VAC; 25 and 50W ratings, 2250 VAC.
128
1-866-9-OHMITE ⢠Intâl 1-847-258-0300 ⢠Fax 1-847-574-7522 ⢠www.ohmite.com ⢠info@ohmite.com
(continued)
|
▷ |