MMC06F4704ETP Datasheet, PDF (1/1 Pages) Ohmite Mfg. Co. – High Voltage Thick Film SMD Chip

Features
• High Voltage Ratings
• Smaller Package Sizes
• Low Cost
• Wraparound Terminals
S p e cific a ti o ns
Prefered Number Series for
Resistors:
±1%, 2%: E96, E24
±5%, 10%: E24
Material
Substrate: Alumina
Resistor: Thick Film
Electrical
Tolerance: 1-10%
Derating: Linearly from 100% at
70°C to 0% at 125°C
Isolation Voltage: 500V
(ex. MMC06: 100V)
Oper. Temp. Range: -55°~+125°
Mini Macro Chip Series
L
High Voltage Thick Film
SMD Chip
W
A
t
B
Series
(Size Resistance
in./met.) Range
Power
TCR Rating (W) Voltage Isolation
10^-6/°C @70°C Rating* Voltage L
Dimensions (in./mm)
W
t
A
Qty./
B Reel
MMC06
(0603/1608)
470Ω~10MΩ
47Ω~464Ω
±100 0.1
±200
200 100 0.063 ±.004 0.031 ±.006 0.018 ±.004 0.012 ±.004 0.012 ±.004 5000
1.6 ±0.1 0.8 ±0.15 0.45 ±0.1 0.3 ±0.1 0.3 ±0.1
MMC08
100Ω~10MΩ ±1% & ±2% ±100
(0805/2012) 100Ω~51MΩ ±5% & ±10%
47Ω~97.6Ω
±200
0.125 300
500 0.079 ±.004 0.049 ±.004 0.022 ±.004 0.016 ±.008 0.016 ±.008 5000
2.0 ±0.1 1.25 ±0.10 0.55 ±0.1 0.4 ±0.2 0.4 ±0.2
MMC12
100Ω~10MΩ ±1% & ±2% ±100
0.25
400
500 0.126 ±.004 0.063 ±.006 0.022 ±.004 0.020 ±.01 0.020 ±.01 5000
(1206/3216) 100Ω~51MΩ ±5% & ±10%
3.2 ±0.1 1.6 ±0.15 0.55 ±0.1 0.5 ±0.25 0.5 ±0.25
47Ω~97.6Ω
±200
MMC25
560Ω~20MΩ ±1% & ±2% ±100
1.0
(2512/6332) 560Ω~51MΩ ±5% & ±10%
100Ω~549Ω
±200
47Ω~97.6Ω
±500~-200
800 500 0.248 ±.004 0.126 ±.006 0.022 ±.004 0.024 ±.008 0.024 ±.008 4000
6.3 ±0.1 3.2 ±0.15 0.55 ±0.1 0.6 ±0.2 0.6 ±0.2
*Use Ohm’s Law (V= √ P*R) to calculate maximum working voltage.
Note: Limiting Element Voltage can only be applied to resistors when the resistance is equal to or higher than the critical resistance value.
D ERA T I N G
100
80
60
40
20
0
0
25
50
70 75
100
125
Ambient Temperature, °C
land Pattern (in.)
Land pattern dimensions are for reference only
M
N
L
O
Size
MMC06
MMC08
MMC12
MMC25
M
0.075
0.095
0.146
0.272
N
0.024
0.032
0.040
0.048
O
0.041
0.069
0.080
0.150
L
0.027
0.031
0.066
0.176
ordering information
RoHS Compliant
MMC12J4704ETP
Type
Wattage
06 = 0.1
08 = 0.125
12 = 0.25
25 = 1.0
Tolerance Resistance
Packaging
F = 1% First 3 digits are TP = Paper tape
G = 2% significant; 4th digit (use on MMC06,
J = 5% is multiplier (# of MMC08, MMC12)
K = 10% zeroes to follow). TR = Embossed tape
Examples:
(use on MMC25)
4704 = 4,700,000
1214 = 1,210,000
Use E96 values for 1%
Use E24 values for 5%
Note: Units are marked with 3-digit (E24 Series) or 4-digit (E96 Series). 4-digit marking
not available on MMC06 sizes.
Ohmite Mfg. Co. 1600 Golf Rd., Rolling Meadows, IL 60008 • 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax [phone] • www.ohmite.com • [e-mail] 5