HVF1206T2502FE Datasheet, PDF (1/1 Pages) Ohmite Mfg. Co. – High Voltage Flip Chip Film

Ohmite’s High Voltage Flip Chip Series incorporates high accu-
racy screen printing technology to achieve high voltage capability
in a stable flip chip SMD chip resistor package. The HVF Series
offers unmatched performance in comparison to standard chip
resistors. Its unique design provides lower voltage and tempera-
ture coefficients, less noise, tighter tolerances, better stability,
higher resistance values, and higher voltage ratings. HVF is
available in convenient 1206 and 2512 footprints.
Features
Specifications
• High voltage up to 3,000 volts
• Industry standard sizes
• Working temperature range
–55°C to 200°C
• Designed for automatic insertion
Derating
100
80
70°
60
40
20
0
0
50
100
150
200
Ambient Temperature, °C
Resistance Range:
1KΩ to 100GΩ
Resistance Tolerance: ±1% std.;
5% for HVF1206 100MΩ-10GΩ
more; 10% for 10GΩ+
Temperature Coefficient:
±100ppm std.
Coating: Silicone
Solder Pad Material: Silver
(PdAg)
land Pattern (in.)
Land pattern dimensions are for
reference only
M
N
L
O
Size
MN
O
L
HVF1206 0.150 0.040 0.080 0.070
HVF2512 0.288 0.062 0.140 0.164
Voltage Coefficient of Resistance
Series Resistance Range VCR (-ppm/V)*
1206
2512
1K ..10MΩ
10M ..100MΩ
100M ..1GΩ
1GΩ .. 5GΩ
1K ..30MΩ
30M ..300MΩ
300M ..3GΩ
3GΩ .. 5GΩ
<3.20
<15.00 *Typical values. Voltage coefficient of
<29.00
<40.00
resistance strongly depends on the
resistance value. Contact Ohmite for
<0.80
<4.00
details.
<7.00
<10.00
ordering information
RoHS
Compliant
Taping Code
blank = bulk package
T = tape & reel
HVF1206T1004JET
High Voltage
Flip Chip
Series
Case Size TCR
Ohms
Tolerance
1206
T = 100 ppm First 3 digits are F = 1%
2512
significant; last
G = 2%
digit specifies
J = 5%
number of zeros to
follow. Example:
1006 = 100MΩ
Check product availability at www.ohmite.com
Silicone
HVF Series
Aluminum Oxide _a
High Voltage
Flip Chip Film
T
L
Ruthenium Oxide
W
Silver (PdAg)
Resistance
Power
Std.
Rating Voltage Dimensions (in. ±0.008) Qty./
Series Range Tol. (mW) Rating* L W a T (max.) Reel**
HVF1206 ^{1K-100M 1% std. 300 1,500 0.128 0.063 0.018 0.028 1000}
100M-10G 5%
10G-100G 10%
HVF2512 1K-100G 1% std. 1000 3,000 0.252 0.126 0.026 0.032 1000
*Use Ohm’s Law (V= √ P*R) to calculate maximum working voltage.
**Maximum available quantity per reel is 3,500 for 1206 size and 2,000 for
2512 size; call 1-866-9-OHMITE for details.
Performance data
Insulation Resistance
Dielectric Strength
Thermal Shock
Overload
Moisture Resistance
Load Life
>10,000 MΩ
>1,000 Volt
∆ R/R < 0.1% typ.,
0.50% max.
∆ R/R < 0.1% typ.,
0.50% max.
∆ R/R < 0.1% typ.,
0.50% max.
∆ R/R < 0.1% typ.,
0.50% max.
500 Volt 25 °C 75% relative humidity
25 °C 75% relative humidity
MIL Std. 202, method 107
Cond. C (IEC 68 -2 -14)
1,5 x Pnom, 5 sec
(do not exceed max. voltage)
MIL Std. 202,
method 106 (IEC 68 -2 -3)
1000 hours at rated power
(IEC 115 -1)
tape and reel specifications
Per EIA Std. RS-481
Tape
0.069 ±.004
1.75 ±0.10
0.059 +.004/-0.0
1.5 +0.10/-0.0
0.157 ±.004
4.0 ±0.10
0.079 ±.002
2.0 ±0.05
0.032 ±.004
0.81 ±0.10
0.138 ±.002
3.5 ±0.05
0.157 ±.004
4.0 ±0.10
A
DIRECTION OF FEED
0.315 ±.012
B
8.0 ±0.30
Standard part numbers For HVF Series
Ohms
25K
50K
75K
100K
250K
500K
1000K
1500K
2000K
2500K
5000K
7500K
1G
10G
HVF1206
HVF1206T2502FE
HVF1206T5002FE
HVF1206T7502FE
HVF1206T1003FE
HVF1206T2503FE
HVF1206T5003FE
HVF1206T1004FE
HVF1206T1504FE
HVF1206T2004FE
HVF1206T2504FE
HVF1206T5004FE
HVF1206T7504FE
HVF1206T1007JE
HVF1206T1008JE
HVF2512
HVF2512T2502FE
HVF2512T5002FE
HVF2512T7502FE
HVF2512T1003FE
HVF2512T2503FE
HVF2512T5003FE
HVF2512T1004FE
HVF2512T1504FE
HVF2512T2004FE
HVF2512T2504FE
HVF2512T5004FE
HVF2512T7504FE
HVF2512T1007FE
HVF2512T5007FE
Trailer
230mm min.–560mm
max. May consist of
carrier and/or cover tape
followed by a minimum
of 160mm of carrier with
sealed cover tape
Reel
7.00 ±.079
178.0 ±2.0
Components
Leader
Minimum of 40
empty component
pockets sealed
with cover tape
0.512 ±.008
13.0 ±.20
0.56 max.
14.2 max.
1.969 min.
50.0 min.
0.331 +.059/-0.0
8.4 +1.5/-0.0
Ohmite Mfg. Co. 1600 Golf Rd., Rolling Meadows, IL 60008 • 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax [phone] • www.ohmite.com • [e-mail] 3