G-SERIES Datasheet, PDF (1/2 Pages) Ohmite Mfg. Co. – Corrosion Resistant Terminals for long life

G Series
Capacitor Discharge & Symmetry
F e at u r e s
• High Power Dissipation up to 13W @25°C
• Specially Designed to meet Repetitive Pulse
Loading
• Corrosion Resistant Terminals for long life
• Superior Vibration Resistance
• IEC 115-1 Reference Standard
S ER I E S S P EC I F I CA T I ON S
Series Wattage @25°C
GW10
10
GW13
13
Wattage @70°C
8.5
11
Limiting Voltage
685
940
Critical Value
47KΩ
68KΩ
Ohmic Range
1Ω-82K
1Ω-120K
c h a r a c t e r isti c s
Temperature Range -55°C to 200°C
Terminal Strength >25N
Derating 25°C to 350°C, Linearly
TCR ±100 ppm/°C
Tolerance 1%, ±2%, ±5%, ±10%
Performance DATA
Endurance at Full Rated Power for 1000hrs, (1.5hrs
Rated Temperature ON,0.5hrs OFF) at 25°C
Short Term 10 x Rated Power for 5 secs, IEC115-1,
Overload Clause 4.1.3
Damp Heat 90-95% RH, 40°C, 56 Days,
Steady State IEC 115-1, Clause 4.17.3
Climatic Sequence As per IEC 115-1,Clause 4.23
Solderability Not Applicable-Resistor is Designed for
Screw Mounting Only
Terminal Strength 25 N Pull Test for 10 Seconds, IEC
115-1, Clause 4.16
∆R < 5% + 0R05
∆R < 2% + 0R05
∆R < 5% + 0R05
∆R < 5% + 0R05
∆R < 0.5% + 0R05
0.374 in. ±.039
9.5 mm ±1
0.0157 in. ±.0019
0.40 mm ±.05
0.21 in. ±.008
5.35 mm ±.20
D I MEN S I ON S
ø 0.25 in. ±.008
6.35 mm ±.20
0.827 in. ±.039
21 mm ±1

Length P
Series (in. ±.039 / mm±1)
GW10
GW13
0.866 / 22.0
1.252 / 31.8
P
0.590 in. ±.039
15 mm ±1
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax [phone] • www.ohmite.com • [e-mail]
63
(continued)