|
AP851 Datasheet, PDF (1/2 Pages) Ohmite Mfg. Co. – Single screw mounting to heat sink | |||
|
AP851 50 Watts TO-220 High
Power Resistors
A high power TO-220 style resistor package designed for high frequency emitter
circuits in switching power supplies. Also used in voltage regulation and low energy
pulse loading.
⢠50 Watts at 25ËC case temperature on heat sink
⢠Single screw mounting to heat sink
⢠Moulded case for proctection and easy to mount
⢠Non-inductive design
⢠Electrically isolated case
⢠RoHS Compliant
Characteristics
Power rating:
Operating voltage:
Dielectric strength:
Insulation resistance:
Temperature coefficient:
Short time overload:
Load life:
Damp heat with load:
Solderability:
Thermal shock:
Terminal strength:
Vibration and high frequency:
2.25 Watts in free air
420V max
1800Vac
10GΩ min
As specified, referenced to 25ËC, âR taken at +105ËC
âR ±0.3%, 2 times rated power with applied voltage not to exceed 1.5 times maximum continuous
operating voltage for 5 seconds
âR ±1.0%, 2000 hours at rated power
âR ±0.5%, 40 ±2ËC, 90 - 95% R.H max working voltage for 1000 hours with 1.5 hours âONâ and
0.5 hours âOFFâ
90% min coverage, 245 ±5ËC for 3 seconds
âR ±0.3%, -65ËC - 150ËC, 100 cycles
âR ±0.2%, 2.4 N
âR ±0.2%, 20g peak
Electrical Specifications
Resistance
Value Range
R1 - 1R
Available Tolerance & Pref.
Value Ranges
Available TCR
J (±5%) K (±10%)
Not specified
1R02 - 3R
3R01 - 10R
F (±1%) , J (±5%) ,
K (±10%)
10R2 - 10K
D (±0.5%) F (±1%) J
(±5%) K (±10%)
±300ppm/ËC
±100ppm/ËC
±200ppm/ËC
±50ppm/ËC
±100ppm/ËC
±200ppm/ËC
Preferred value ranges:
F (±1%) - E96 , J (±5%) - E24, K (±10%) - E12
Derating Curve
100
80
60
40
20
0
0
25
50
75
100
125
150
175
Case Temperature (°C)
Page 1 of 2
For more information and ordering, please consult
www.arcolresistors.com
2/13.18
|
▷ |