59-6-1AE Datasheet, PDF (1/1 Pages) OEN India Limited – MINIATURE POWER RELAY

59
MINIATURE POWER RELAY
• International Standard Foot Print
• Compact High Performance
• Direct PCB type
• Dust Protected
• With Technical assistance from Tyco, Germany
• UL Approval for 1 Form A&C Relays (Including K Type)
• Suitable DIN Rail and PCB Sockets Available
Contact Arrangement
Contact Material
Contact Rating
Rated Voltage
Ma ximum Voltage
:I Form A, I Form C,
:I Form A / I Form C.
(K type)
:2 Form A / 2 Form C.
:Silver Alloy
:230 VAC/24 VDC
:230VAC/220VDC
Ma ximum Continuous Current
at 230VAC/24VDC
1 Pole K Type
:16A
1 Pole (Standard)
:10A
2 Pole
:5 A
Nominal Coil Power
Operating Power
:0.5W (approx)
:0.36W (approx)
Life Expectancy
Mechanical
7
:10 operations
Electrical
5
:10 operations
Contact Resistance (Initial) :50 milli Ohms
Dielectric Strength
Between Contacts & Coil :4000 VRMS
Between Open Contactsl :1000 VRMS
Insulation Resistance
:500 Meg.Ohms at
0
500VDC,25 C,RH50
Operate time at
Nominal Voltage
Release time at
Nominal Voltage
:8 milli sec.(Typ)
:3 milli sec.(Typ)
Ambient Temperature
0
0
:–45 C to +80 C
Weight
:20 gms (approx)
For Suitable Sockets Refer Socket Section
Typical applications
Industrial Electronics, PLCs , Timers,
Automation, UPS, Home Appliances
Of fice
All dimensions are in mm. Specifications subject to change
without notice. Tolerance unless otherwise specified is ± 10%
6
4.40
12
8.80
24
17.50
48
35.00
0.6
70
1.2
270
2.4
1100
4.8
3300
DRILLING PATTERN
3.5
1C*
59 - 12 - 1C E - X X X
Product
Series
Coil Voltage
(Ref. Coil Data)
Sealed _Specialities
if any
Contact arrangement
1A - I FORM A (10A)
1AK - I FORM A (16A)
1C - I FORM C (10A)
1CK - I FORM C (16A)
2C - 2 FORM C (5A)
2A - 2 FORM A (5A)
CIRCUIT DIAGRAMS
1 Form A (K type)
1 Form C (K type)
1 Form C (Std)
2 Form C
1C
Limiting Curve for Power Load
50
2C, 1CK 1AK
*1 Form C Relays with 3.5 mm pitch available
on request.
10
1C
AC
5
2C
1
DC
0.5
0.1
10
20 30 40 50
100 200 300 400 500
Contact Voltage(V)
DIMENSIONS
30.0 MA X
*
13 MA X
*
0.5±0.1
1.1±0.2
* Vent hole to be opened after PCB Soldering & Cleaning
3.4±0.4