74AXP1T125GWH Datasheet, PDF (9/22 Pages) NXP Semiconductors – Dual supply buffer/line driver; 3-state

NXP Semiconductors
74AXP1T125
Dual supply buffer/line driver; 3-state
Table 11. Dynamic characteristics …continued
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 13; for wave form see Figure 5 and Figure 6.
Symbol Parameter Conditions
2.5 V  0.2 V
V_CCO
3.3 V  0.3 V
Unit
5.0 V  0.5 V
Min Typ^[1] Max Min Typ^[1] Max Min Typ^[1] Max
T_amb = 40 C to +85 C
t_pd
propagation A to Y
[2]
delay
V_CCI = 0.75 V to 0.85 V
2
V_CCI = 1.1 V to 1.3 V
2.4
V_CCI = 1.4 V to 1.6 V
2.1
V_CCI = 1.65 V to 1.95 V
2.0
V_CCI = 2.3 V to 2.7 V
1.9
t_en
enable time OE to Y
[3]
V_CCI = 0.75 V to 0.85 V
2
V_CCI = 1.1 V to 1.3 V
2.4
V_CCI = 1.4 V to 1.6 V
2.1
V_CCI = 1.65 V to 1.95 V
2.0
V_CCI = 2.3 V to 2.7 V
1.9
t_dis
disable
OE to Y
[4]
time
V_CCI = 0.75 V to 0.85 V
2
V_CCI = 1.1 V to 1.3 V
2.4
V_CCI = 1.4 V to 1.6 V
2.1
V_CCI = 1.65 V to 1.95 V
2.0
V_CCI = 2.3 V to 2.7 V
1.9
t_t
transition V_CCO = 5.5 V
time
[5] _1.0
13 152 2
6.5 10.8 2.2
5.7 9.1 2.0
5.3 8.7 1.8
4.9 8.1 1.7
17 167 2
7.2 12.5 2.2
6.3 11.0 2.0
5.8 10.5 1.8
5.3 9.9 1.7
17 167 2
9.2 14.2 2.2
8.2 13.1 2.0
7.8 12.6 1.8
7.2 12.1 1.7
-
- 1.0
13 179 2
5.9 9.5 2.1
5.1 8.2 1.9
4.7 7.7 1.8
4.3 7.1 1.6
17 194 2
6.7 11.4 2.1
5.7 10.2 1.9
5.2 9.8 1.8
4.7 9.1 1.6
18 194 2
9.9 15.2 2.1
9.1 14.1 1.9
8.6 13.7 1.8
8.1 13.2 1.6
-
- 1.0
14 210 ns
5.6 9.0 ns
4.8 7.7 ns
4.4 7.3 ns
4.0 6.6 ns
20 225 ns
6.5 11.2 ns
5.5 9.8 ns
5.0 9.2 ns
4.5 8.6 ns
16 225 ns
8.3 13.2 ns
7.4 12.1 ns
7.0 11.7 ns
6.5 11.2 ns
-
- ns
[1] Typical values are measured at nominal supply voltages and t_amb = +25 C.
[2] t_pd is the same as t_PLH and t_PHL.
[3] t_en is the same as t_PZH and t_PZL.
[4] t_dis is the same as t_PHZ and t_PLZ.
[5] t_t is the same as t_THL and t_TLH.
74AXP1T125
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 21 December 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
9 of 22