English
Language : 

74F656A Datasheet, PDF (7/14 Pages) NXP Semiconductors – Octal buffer/driver with parity, non-inverting 3-State
NXP Semiconductors
74F656A
Octal buffer/driver with parity; non-inverting; 3-state
Table 7. Static characteristics …continued
Symbol Parameter
Conditions
VOL
LOW-level output
voltage
VCC = 4.5 V; VIL = 0.8 V; VIH = 2.0 V
IOL = 64 mA
VCC = ±10 %
VCC = ±5 %
II
input leakage current VCC = 0 V; VI = 7.0 V
IIH
HIGH-level input current VCC = 5.5 V; VI = 2.7 V; commercial
pin Dn
pin PI, OEn
VCC = 5.5 V; VI = 2.7 V; industrial
pin Dn
pin PI, OEn
IIL
LOW-level input current VCC = 5.5 V; VI = 0.5 V
pin Dn
pin PI, OEn
IOZ
OFF-state output current VCC = 5.5 V
VO = 2.7 V
VO = 0.5 V
IO
output current
VCC = 5.5 V
ICC
supply current
VCC = 5.5 V; VI = GND or VCC
outputs HIGH-state
outputs LOW-state
outputs OFF-state
25 °C
−40 °C to +85 °C Unit
Min Typ[1] Max Min Max
-
-
-
- 0.42 -
-
-
-
-
0.55 V
-
0.55 V
-
100 μA
-
-
-
-
40 μA
-
-
-
-
20 μA
-
-
-
-
80 μA
-
-
-
-
40 μA
-
-
-
-
−40 μA
-
-
-
-
−20 μA
-
-
-
-
50 μA
-
-
-
-
−50 μA
[2] -
-
- −100 −225 mA
- 50 -
-
80 mA
- 78 -
-
110 mA
- 83 -
-
90 mA
[1] All typical values are measured at VCC = 5 V.
[2] Not more than one output should be tested at a time, and the duration of the test should not exceed one second.
10. Dynamic characteristics
Table 8. Dynamic characteristics
GND = 0 V; for test circuit, see Figure 7.
Symbol Parameter
Conditions
tPLH
LOW to HIGH
Dn to Qn;
propagation delay see Figure 5
Dn to ΣE, ΣO; see
Figure 5
tPHL
HIGH to LOW
Dn to Qn;
propagation delay see Figure 5
Dn to ΣE, ΣO; see
Figure 5
tPZH
OFF-state to HIGH OEn to Qn;
propagation delay see Figure 6
25 °C;
VCC = 5.0 V
0 °C to 70 °C; −40 °C to +85 °C; Unit
VCC = 5.0 V ± 0.5 V VCC = 5.0 V ± 0.5 V
Min Typ Max Min
Max
Min
Max
2.0 4.0 6.5 2.0
7.0
2.0
8.0 ns
5.5 10.0 13.0 5.5
14.0
4.5
16.5 ns
2.5 5.5 7.0 2.5
7.5
2.5
9.0 ns
5.5 11.0 14.5 5.5
16.5
5.5
18.0 ns
3.5 7.0 10.5 3.5
11.5
3.0
13.0 ns
74F656A_5
Product data sheet
Rev. 05 — 25 March 2010
© NXP B.V. 2010. All rights reserved.
7 of 14