74LVC1G175 Datasheet, PDF (6/17 Pages) NXP Semiconductors – Single D-type flip-flop with reset; positive-edge trigger

NXP Semiconductors
74LVC1G175
Single D-type flip-flop with reset; positive-edge trigger
Table 7. Static characteristics …continued
At recommended operating conditions. Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
Typ
T_amb = −40 °C to +125 °C
V_IH
HIGH-level input voltage
V_CC = 1.65 V to 1.95 V
0.65 × V_CC -
V_CC = 2.3 V to 2.7 V
1.7
-
V_CC = 2.7 V to 3.6 V
V_CC = 4.5 V to 5.5 V
2.0
-
0.7 × V_CC -
V_IL
LOW-level input voltage V_CC = 1.65 V to 1.95 V
-
-
V_CC = 2.3 V to 2.7 V
-
-
V_CC = 2.7 V to 3.6 V
V_CC = 4.5 V to 5.5 V
-
-
-
-
V_OH
HIGH-level output voltage V_I = V_IH or V_IL
I_O = −100 µA; V_CC = 1.65 V to 5.5 V
V_CC − 0.1 -
I_O = −4 mA; V_CC = 1.65 V
0.95
-
I_O = −8 mA; V_CC = 2.3 V
1.7
-
I_O = −12 mA; V_CC = 2.7 V
1.9
-
I_O = −24 mA; V_CC = 3.0 V
2.0
-
I_O = −32 mA; V_CC = 4.5 V
3.4
-
V_OL
LOW-level output voltage V_I = V_IH or V_IL
I_O = 100 µA; V_CC = 1.65 V to 5.5 V
-
-
I_O = 4 mA; V_CC = 1.65 V
-
-
I_O = 8 mA; V_CC = 2.3 V
-
-
I_O = 12 mA; V_CC = 2.7 V
-
-
I_O = 24 mA; V_CC = 3.0 V
-
-
I_O = 32 mA; V_CC = 4.5 V
-
-
I_I
input leakage current
V_CC = 0 V to 5.5 V; V_I = 5.5 V or GND
-
-
I_OFF
power-off leakage current V_CC = 0 V; V_I or V_O = 5.5 V
-
-
I_CC
supply current
V_CC = 1.65 V to 5.5 V; I_O = 0 A;
-
-
V_I = 5.5 V or GND
∆I_CC
additional supply current V_CC = 2.3 V to 5.5 V; V_I = V_CC − 0.6 V;
-
-
I_O = 0 A
[1] All typical values are measured at T_amb = 25 °C.
[2] These typical values are measured at V_CC = 3.3 V.
Max
Unit
-
V
-
V
-
V
-
V
0.35 × V_CC V
0.7
V
0.8
V
0.3 × V_CC V
-
V
-
V
-
V
-
V
-
V
-
V
0.10
V
0.70
V
0.45
V
0.60
V
0.80
V
0.80
V
±20
µA
±20
µA
40
µA
5000
µA
74LVC1G175_3
Product data sheet
Rev. 03 — 21 May 2007
© NXP B.V. 2007. All rights reserved.
6 of 17