|
74HC7541D Datasheet, PDF (6/17 Pages) NXP Semiconductors – Octal Schmitt trigger buffer/line driver; 3-state | |||
|
◁ |
NXP Semiconductors
74HC7541; 74HCT7541
Octal Schmitt trigger buffer/line driver; 3-state
Table 7. Dynamic characteristics
GND = 0 V; CL = 50 pF; for test circuit see Figure 7.
Symbol Parameter
Conditions
74HCT7541
tpd
propagation delay An to Yn; see Figure 5
VCC = 4.5 V
VCC = 5.0 V; CL = 15 pF
ten
enable time
OEn to Yn; see Figure 6
VCC = 4.5 V
tdis
disable time
OEn to Yn; see Figure 6
VCC = 4.5 V
tt
transition time
VCC = 4.5 V; see Figure 5
CPD
power dissipation per package;
capacitance
VI = GND to VCC ï 1.5 V
Tamb = 25 ï°C
Tamb = ï40 ï°C to +125 ï°C Unit
Min Typ Max Max (85 ï°C) Max (125 ï°C)
[1]
- 19 32
40
- 16 -
-
[1]
- 18 32
40
[1]
- 20 32
40
[2] -
5 12
15
[3] -
32
-
-
48
ns
-
ns
48
ns
48
ns
18
ns
-
pF
[1] tpd is the same as tPLH and tPHL.
ten is the same as tPZL and tPZH.
tdis is the same as tPLZ and tPHZ.
[2] tt is the same as tTHL and tTLH.
[3] CPD is used to determine the dynamic power dissipation (PD in ïW):
PD = CPD ï´ VCC2 ï´ fi ï´ N + ï¥ (CL ï´ VCC2 ï´ fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
ï¥ (CL ï´ VCC2 ï´ fo) = sum of outputs.
11. Waveforms
Vl
An input
GND
VOH
Yn output
VOL
VM
tPHL
VM
tTHL
VM
VM
10 %
tPLH
90 %
tTLH
aaa-000088
Fig 5.
Measurement points are given in Table 8.
VOL and VOH are typical voltage output levels that occur with the output load.
Input to output propagation delays
74HC_HCT7541
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 â 25 July 2011
© NXP B.V. 2011. All rights reserved.
6 of 17
|
▷ |