P89LPC912 Datasheet, PDF (50/66 Pages) NXP Semiconductors – 8-bit microcontrollers with two-clock 80C51 core 1 kB 3 V Flash with 128-byte RAM

NXP Semiconductors
P89LPC912/913/914
8-bit microcontrollers with two-clock 80C51 core
9. Limiting values
Table 12. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).^[1]
Symbol Parameter
Conditions
T_amb(bias)
T_stg
I_OH(I/O)
bias ambient temperature
storage temperature
HIGH-level output current per
input/output pin
I_OL(I/O)
LOW-level output current per
input/output pin
I_I/Otot(max)
V_n
P_tot(pack)
maximum total input/output current
voltage on any other pin
except V_SS, with respect to
V_DD
total power dissipation (per package) based on package heat
transfer, not device power
consumption
Min
−55
−65
-
-
-
−0.5
-
Max
Unit
+125
°C
+150
°C
8
mA
20
mA
120
mA
+5.5
V
1.5
W
[1] The following applies to Table 12 “Limiting values”:
a) This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive
static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated maximum.
b) Parameters are valid over operating temperature range unless otherwise specified. All voltages are with respect to V_SS unless
otherwise noted.
P89LPC912_913_914_5
Product data sheet
Rev. 05 — 28 September 2007
© NXP B.V. 2007. All rights reserved.
50 of 66