|
BGU7007 Datasheet, PDF (5/19 Pages) NXP Semiconductors – SiGe:C Low Noise Amplifier MMIC for GPS, GLONASS and Galileo | |||
|
◁ |
NXP Semiconductors
BGU7007
SiGe:C Low Noise Amplifier MMIC for GPS, GLONASS and Galileo
Table 7. Characteristics â¦continued
f = 1559 MHz to 1610 MHz; VCC = 1.8 V; VENABLE >= 0.8 V; Pi < â40 dBm; Tamb = 25 °C; input matched to 50 Ω using a
5.6 nH inductor; unless otherwise specified.
Symbol Parameter
Conditions
Min Typ Max Unit
Pi(1dB)
input power at 1 dB gain compression f = 1559 MHz to 1610 MHz
VCC = 1.5 V
VCC = 1.8 V
VCC = 2.85 V
f = 806 MHz to 928 MHz
â16 â13 -
â15 â12 -
â14 â11 -
dBm
dBm
dBm
VCC = 1.5 V
VCC = 1.8 V
VCC = 2.85 V
f = 1612 MHz to 1909 MHz
[3] â16 â13 -
[3] â15 â12 -
[3] â15 â12 -
dBm
dBm
dBm
IP3i
input third-order intercept point
ton
turn-on time
toff
turn-off time
K
Rollett stability factor
VCC = 1.5 V
VCC = 1.8 V
VCC = 2.85 V
f = 1.575 GHz
VCC = 1.5 V
VCC = 1.8 V
VCC = 2.85 V
[3] â14 â11 -
[3] â13 â10 -
[3] â11 â8 -
[4] 1 4 -
[4] 1 4 -
[4] 2 5 -
[5] -
-
2
[5] -
-
1
1- -
dBm
dBm
dBm
dBm
dBm
dBm
μs
μs
[1] PCB losses are subtracted.
[2] Including PCB losses.
[3] Out of band.
[4] f1 = 1713 MHz; f2 = 1851 MHz; P1 = P2 = â30 dBm.
[5] Within 10 % of the final gain.
Table 8. ENABLE (pin 5)
â40 °C ⤠Tamb ⤠+85 °C; 1.5 V ⤠VCC ⤠2.85 V
VENABLE (V)
⤠0.35
⥠0.8
State
OFF
ON
BGU7007
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 â 20 May 2011
© NXP B.V. 2011. All rights reserved.
5 of 19
|
▷ |