AN11841 Datasheet, PDF (5/21 Pages) NXP Semiconductors – PN7150 Arduino SBC Kit Quick Start Guide

NXP Semiconductors
2. Quick Startup on UDOO Neo
AN11841
PN7150 Arduino SBC Kit Quick Start Guide
2.1 Required items
• UDOO Neo [2]
• Compatible MicroSD card of at least 4 Gb memory size (8 Gb for Android demo image)
• Computer (running Windows, Linux or Mac OS X) for SD/MicroSD card installation and
remote access to UDOO Neo
• Micro USB cable to connect UDOO Neo to the computer
• UDOO Neo demo image file (see [9])
• Other than for Linux NFC demo (see 2.4), where UDOO Neo is run as a headless IoT
device, one need for the Android NFC demo (see 2.5) in addition the following items:
- USB Mouse
- Micro HDMI cable to connect to Monitor / TV
- UDOO 12V power supply (Note: the 5V generated by UDOO Neo board from
the Micro USB is not stable on the Android image. Without the 12V power
supply the RF discovery may suddenly stop)
2.2 Hardware preparation
First of all assemble the PN7150 NFC Controller Board with the Arduino Interface Board.
Fig 2. OM5578/PN7150ARD demo kit assembly
AN11841
Application note
COMPANY PUBLIC
All information provided in this document is subject to legal disclaimers.
Rev. 1.2 — 19 August 2016
373012
© NXP Semiconductors N.V. 2016. All rights reserved.
5 of 21