74AUP1G98 Datasheet, PDF (5/19 Pages) NXP Semiconductors – Low-power configurable multiple function gate

NXP Semiconductors
74AUP1G98
Low-power configurable multiple function gate
V_CC
Fig 11. Inverter
8. Limiting values
B1
6
B
Y
2
5
3
4Y
001aad997
Table 6. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
Conditions
Min
Max
Unit
V_CC
supply voltage
−0.5
+4.6
V
I_IK
input clamping current V_I < 0 V
−50
-
mA
V_I
input voltage
[1] _−0.5
+4.6
V
I_OK
output clamping current V_O < 0 V
−50
-
mA
V_O
output voltage
Active mode and Power-down mode
[1] _−0.5
+4.6
V
I_O
output current
V_O = 0 V to V_CC
-
±20
mA
I_CC
I_GND
T_stg
P_tot
supply current
ground current
storage temperature
total power dissipation
T_amb = −40 °C to +125 °C
-
−50
−65
[2] _-
50
mA
-
mA
+150
°C
250
mW
[1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For SC-88 packages: above 87.5 °C the value of P_tot derates linearly with 4.0 mW/K.
For XSON6 packages: above 118 °C the value of P_tot derates linearly with 7.8 mW/K.
9. Recommended operating conditions
Table 7.
Symbol
V_CC
V_I
V_O
T_amb
Recommended operating conditions
Parameter
supply voltage
input voltage
output voltage
ambient temperature
Conditions
Active mode
Power-down mode; V_CC = 0 V
Min Max Unit
0.8
3.6
V
0
3.6 V
0
V_CC
V
0
3.6 V
−40 +125 °C
74AUP1G98_3
Product data sheet
Rev. 03 — 29 June 2009
© NXP B.V. 2009. All rights reserved.
5 of 19