PCA9698_10 Datasheet, PDF (44/48 Pages) NXP Semiconductors – 40-bit Fm+ I2C-bus advanced I/O port with RESET, OE and INT

NXP Semiconductors
PCA9698
40-bit Fm+ I²C-bus advanced I/O port with RESET, OE and INT
temperature
maximum peak temperature
= MSL limit, damage level
minimum peak temperature
= minimum soldering temperature
peak
temperature
time
001aac844
MSL: Moisture Sensitivity Level
Fig 43. Temperature profiles for large and small components
For further information on temperature profiles, refer to Application Note AN10365
“Surface mount reflow soldering description”.
17. Abbreviations
Table 18. Abbreviations
Acronym
Description
CDM
Charged Device Model
DUT
Device Under Test
ESD
ElectroStatic Discharge
GPIO
General Purpose Input/Output
HBM
Human Body Model
I²C-bus
Inter-Integrated Circuit bus
LED
Light Emitting Diode
MM
Machine Model
PICMG
PCI Industrial Computer Manufacturers Group
PLC
Programmable Logic Controller
POR
Power-On Reset
PWM
Pulse Width Modulation
RAID
Redundant Array of Independent Discs
SMBus
System Management Bus
PCA9698
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 3 August 2010
© NXP B.V. 2010. All rights reserved.
44 of 48