English
Language : 

74AUP1G132 Datasheet, PDF (4/18 Pages) NXP Semiconductors – Low-power 2-input NAND Schmitt trigger
NXP Semiconductors
74AUP1G132
Low-power 2-input NAND Schmitt trigger
9. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
Conditions
Min
Max
Unit
VCC
IIK
VI
IOK
VO
IO
ICC
IGND
Tstg
Ptot
supply voltage
input clamping current
input voltage
output clamping current
output voltage
output current
supply current
ground current
storage temperature
total power dissipation
VI < 0 V
VO < 0 V
Active mode and Power-down mode
VO = 0 V to VCC
Tamb = −40 °C to +125 °C
−0.5
−50
[1] −0.5
−50
[1] −0.5
-
-
−50
−65
[2] -
+4.6
V
-
mA
+4.6
V
-
mA
+4.6
V
±20
mA
50
mA
-
mA
+150
°C
250
mW
[1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For TSSOP5 packages: above 87.5 °C the value of Ptot derates linearly with 4.0 mW/K.
For XSON6 packages: above 118 °C the value of Ptot derates linearly with 7.8 mW/K.
10. Recommended operating conditions
Table 6.
Symbol
VCC
VI
VO
Tamb
Recommended operating conditions
Parameter
Conditions
supply voltage
input voltage
output voltage
Active mode
ambient temperature
Power-down mode; VCC = 0 V
11. Static characteristics
Min Max Unit
0.8
3.6
V
0
3.6
V
0
VCC
V
0
3.6
V
−40 +125 °C
Table 7. Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
Typ
Tamb = 25 °C
VOH
HIGH-level output voltage
VI = VT+ or VT−
IO = −20 µA; VCC = 0.8 V to 3.6 V
IO = −1.1 mA; VCC = 1.1 V
IO = −1.7 mA; VCC = 1.4 V
IO = −1.9 mA; VCC = 1.65 V
IO = −2.3 mA; VCC = 2.3 V
IO = −3.1 mA; VCC = 2.3 V
IO = −2.7 mA; VCC = 3.0 V
IO = −4.0 mA; VCC = 3.0 V
VCC − 0.1 -
0.75 × VCC -
1.11
-
1.32
-
2.05
-
1.9
-
2.72
-
2.6
-
74AUP1G132_2
Product data sheet
Rev. 02 — 15 June 2009
Max
Unit
-
V
-
V
-
V
-
V
-
V
-
V
-
V
-
V
© NXP B.V. 2009. All rights reserved.
4 of 18