LPC11U1X Datasheet, PDF (37/64 Pages) NXP Semiconductors – 32-bit ARM Cortex-M0 microcontroller; up to 32 kB flash; 6 kB SRAM; USB device; USART

NXP Semiconductors
LPC11U1x
32-bit ARM Cortex-M0 microcontroller
X
X
(X)
X
001aac984
X
<tbd>
X
X
X
X
X
X
X
X
X (X)
Fig 8.
Conditions: T_amb = 25 °C; active mode entered executing code while(1){} from flash;
internal pull-up resistors disabled; system oscillator and system PLL enabled; IRC, BOD disabled;
all peripherals disabled in the SYSAHBCLKCTRL register (SYSAHBCLKCTRL = <tbd>); all
peripheral clocks disabled; USB_DP and USB_DM pulled LOW externally.
Typical supply current versus regulator supply voltage V_DD in active mode
X
X
(X)
X
001aac984
X
<tbd>
X
X
X
X
X
X
X
X
X (X)
Fig 9.
Conditions: V_DD = 3.3 V; Active mode entered executing code while(1){} from flash; internal
pull-up resistors disabled; system oscillator and system PLL enabled; IRC, BOD disabled; all
peripherals disabled in the SYSAHBCLKCTRL register (SYSAHBCLKCTRL = <tbd>); all
peripheral clocks disabled; USB_DP and USB_DM pulled LOW externally.
Typical supply current versus temperature in Active mode
LPC11U1X
Objective data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 11 April 2011
© NXP B.V. 2011. All rights reserved.
37 of 64