NX3V1T66 Datasheet, PDF (3/18 Pages) NXP Semiconductors – Low-voltage analog switch

NXP Semiconductors
NX3V1T66
Low-voltage analog switch
7.2 Pin description
Table 3.
Symbol
Y
Z
GND
E
n.c.
V_CC
Pin description
Pin
SOT353-1
1
2
3
4
-
5
SOT886
1
2
3
4
5
6
8. Functional description
Description
independent input or output
independent output or input
ground (0 V)
enable input (active HIGH)
not connected
supply voltage
Table 4.
Input E
L
H
Function table^[1]
[1] H = HIGH voltage level; L = LOW voltage level.
9. Limiting values
Switch
OFF-state
ON-state
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
Conditions
Min
Max
Unit
V_CC
supply voltage
V_I
input voltage
enable input E
V_SW
switch voltage
I_IK
input clamping current V_I < −0.5 V
I_SK
switch clamping current V_I < −0.5 V or V_I > V_CC + 0.5 V
I_SW
switch current
V_SW > −0.5 V or V_SW < V_CC + 0.5 V;
source or sink current
−0.5
[1] _−0.5
[2] _−0.5
−50
-
-
+4.6
V
+4.6
V
V_CC + 0.5 V
-
mA
±50
mA
±500
mA
V_SW > −0.5 V or V_SW < V_CC + 0.5 V;
pulsed at 1 ms duration, < 10 % duty cycle;
peak current
-
±750
mA
T_stg
storage temperature
P_tot
total power dissipation T_amb = −40 °C to +125 °C
−65
[3] _-
+150
°C
250
mW
[1] The minimum input voltage rating may be exceeded if the input current rating is observed.
[2] The minimum and maximum switch voltage ratings may be exceeded if the switch clamping current rating is observed.
[3] For TSSOP5 package: above 87.5 °C the value of P_tot derates linearly with 4.0 mW/K.
For XSON6 package: above 45 °C the value of P_tot derates linearly with 2.4 mW/K.
NX3V1T66_2
Product data sheet
Rev. 02 — 24 July 2008
© NXP B.V. 2008. All rights reserved.
3 of 18