 English |
|
|
|
|
|
|
|
| 74HC4052D652 Datasheet, PDF (14/29 Pages) NXP Semiconductors – Dual 4-channel analog multiplexer/demultiplexer | |||
| |||
| ◁ |
NXP Semiconductors
74HC4052; 74HCT4052
Dual 4-channel analog multiplexer/demultiplexer
Table 9. Dynamic characteristics for 74HC4052 â¦continued
GND = 0 V; tr = tf = 6 ns; CL = 50 pF; for test circuit see Figure 15.
Vis is the input voltage at a nYn or nZ terminal, whichever is assigned as an input.
Vos is the output voltage at a nYn or nZ terminal, whichever is assigned as an output.
Symbol Parameter
Conditions
Min Typ Max Unit
toff
turn-off time
E, Sn to Vos; RL = 1 kï; see Figure 14
[4]
VCC = 2.0 V; VEE = 0 V
-
-
375
ns
VCC = 4.5 V; VEE = 0 V
-
-
75
ns
VCC = 6.0 V; VEE = 0 V
-
-
64
ns
VCC = 4.5 V; VEE = ï4.5 V
-
-
57
ns
[1] All typical values are measured at Tamb = 25 ï°C.
[2] tpd is the same as tPHL and tPLH.
[3] ton is the same as tPZH and tPZL.
[4] toff is the same as tPHZ and tPLZ.
[5] CPD is used to determine the dynamic power dissipation (PD in ïW).
PD = CPD ï´ VCC2 ï´ fi ï´ N + ï{(CL + Csw) ï´ VCC2 ï´ fo} where:
fi = input frequency in MHz;
fo = output frequency in MHz;
N = number of inputs switching;
ï{(CL + Csw) ï´ VCC2 ï´ fo} = sum of outputs;
CL = output load capacitance in pF;
Csw = switch capacitance in pF;
VCC = supply voltage in V.
Table 10. Dynamic characteristics for 74HCT4052
GND = 0 V; tr = tf = 6 ns; CL = 50 pF; for test circuit see Figure 15.
Vis is the input voltage at a nYn or nZ terminal, whichever is assigned as an input.
Vos is the output voltage at a nYn or nZ terminal, whichever is assigned as an output.
Symbol Parameter
Conditions
Min
Typ
Max
Unit
Tamb = ï40 ï°C to +85 ï°C[1]
tpd
propagation delay Vis to Vos; RL = ï¥ ï; see Figure 13
[2]
VCC = 4.5 V; VEE = 0 V
-
5
15
ns
VCC = 4.5 V; VEE = ï4.5 V
-
4
10
ns
ton
turn-on time
E, Sn to Vos; RL = 1 kï; see Figure 14
[3]
VCC = 4.5 V; VEE = 0 V
-
41
88
ns
VCC = 5.0 V; VEE = 0 V; CL = 15 pF
-
18
-
ns
VCC = 4.5 V; VEE = ï4.5 V
-
28
60
ns
toff
turn-off time
E, Sn to Vos; RL = 1 kï; see Figure 14
[4]
VCC = 4.5 V; VEE = 0 V
-
26
63
ns
VCC = 5.0 V; VEE = 0 V; CL = 15 pF
-
13
-
ns
VCC = 4.5 V; VEE = ï4.5 V
-
21
48
ns
CPD
power dissipation per switch; VI = GND to VCC ï 1.5 V
capacitance
[5] -
57
-
pF
74HC_HCT4052
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 10 â 19 July 2012
© NXP B.V. 2012. All rights reserved.
14 of 29
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese