TWR-KL82Z72M Datasheet, PDF (1/16 Pages) NXP Semiconductors – TWR-KL82Z72M User Guide

NXP Semiconductors
User's Guide
Document Number: TWRKL82Z72MUG
Rev. 1, 07/2016
TWR-KL82Z72M User's Guide
1. Introduction
The NXP TWR-KL82Z72M Tower System modular
development platform module is a low-cost evaluation,
demonstration, and development board, which features
a 96 MHz Kinetis KL82 low-power MCU.
The TWR-KL82Z72M MCU module can operate either
stand-alone or as a part of the NXP Tower System, a
modular development platform that enables rapid
prototyping and tool re-use through reconfigurable
hardware. Take your design to the next level and start
building your Tower System today by visiting
nxp.com/tower for additional Tower System MCU
modules and compatible peripherals.
Contents
1. Introduction........................................................................ 1
1.1. Features ................................................................... 2
1.2. Getting started ......................................................... 3
2. Contents ............................................................................. 3
3. Hardware description ......................................................... 3
3.1. KL82Z72M MCU ................................................... 4
3.2. Clocking.................................................................. 5
3.3. System power.......................................................... 5
3.4. Real-Time Clock supply ......................................... 6
3.5. Serial and Debug Adapter version 2 (OpenSDAv2) 7
3.6. Cortex Debug connector ......................................... 8
3.7. Serial port................................................................ 8
3.8. Reset ....................................................................... 8
3.9. Sensors .................................................................... 8
3.10. Potentiometer, push-buttons, and LEDs ................ 10
3.11. General-purpose Tower System plug-in (TWRPI)
socket 10
3.12. Touch interface ..................................................... 11
3.13. USB interface........................................................ 11
4. Jumper table ..................................................................... 13
5. References ........................................................................ 15
6. Revision history ............................................................... 15
© 2016 NXP B.V.