|
SAA7160E Datasheet, PDF (1/57 Pages) NXP Semiconductors – PCI Express based audio and video bridge | |||
|
SAA7160
PCI Express based audio and video bridge
Rev. 01 â 25 February 2008
Product data sheet
1. General description
The SAA7160E and the SAA7160ET are PCI Express based audio and video capture
bridges. Both devices provide ports for capturing video streams, transport streams,
program streams and audio streams with audio functionality like I2S-bus inputs. The
bridges provide audio and video capture function as required for PCI Express applications
like Microsoft âmultimedia centerâ.
The target is to cover a range of performance applications like personal video recording
and PC TV cards.
The SAA7160E and the SAA7160ET are highly integrated circuits for TV insertion inside
PC systems. Additional high-speed programming ports enable high integrated system
solutions for multimedia applications.
2. Features
2.1 PCI Express interface SAA7160E and SAA7160ET
I Compliant to PCI Express Base Speciï¬cation 1.0a
I Native PCI Express
N 64-bit address support
N MSI and INT_A message support
I The PCI Express circuit supports isochronous data trafï¬c intended for uninterrupted
transfer of streaming data like video streaming
N x1 PCI Express endpoint device (2.5 Gbit/s)
N Low jitter and bit error rate
I Type 0 conï¬guration space header
N Single BAR; conï¬gurable address range of 17 bits, 18 bits, 19 bits or 20 bits
dependent on application requirements
I DMA write support
N 12 DMA write channels for AV streaming
N Managing up to 8 software buffers per DMA channel
N Buffer size of 2 MB extendable to 4 MB (e.g. HDTV)
N Round-robin arbitration between DMAs
Support overï¬ow recovery if PCI Express bandwidth is not granted in the required
amount
|
▷ |