PRTR5V0U4AD Datasheet, PDF (1/7 Pages) NXP Semiconductors – Integrated quad ultra-low capacitance ESD protection

PRTR5V0U4AD
Integrated quad ultra-low capacitance ESD protection
Rev. 01 — 17 December 2007
Product data sheet
1. Product profile
1.1 General description
The PRTR5V0U4AD is designed to protect Input/Output (I/O) ports that are sensitive
concerning capacitive load, such as USB 2.0, Ethernet, Digital Video Interface (DVI), etc.
from destruction by ElectroStatic Discharges (ESD). It provides protection to downstream
signal and supply components from ESD voltages as high as ±8 kV (contact discharge).
The PRTR5V0U4AD incorporates four pairs of ultra-low capacitance rail-to-rail diodes
plus an additional Zener diode. The rail-to-rail diodes are connected to the Zener diode
which allows ESD protection to be independent of the availability of a supply voltage.
The PRTR5V0U4AD is fabricated using thin film-on-silicon technology integrating four
ultra-low capacitance rail-to-rail ESD protection diodes in a miniature 6-lead SOT457
package.
1.2 Features
I ESD protection compliant to IEC 61000-4-2 level 4, ±8 kV contact discharge
I Low voltage clamping due to integrated Zener diode
I Four ultra-low input capacitance (1 pF typical) rail-to-rail ESD protection diodes
I Small 6-lead SOT457 package
1.3 Applications
I General-purpose downstream ESD protection of high frequency analog signals and
high-speed serial data transmission for ports inside:
N Cellular mobile handsets
N USB 2.0 and IEEE 1394 ports in PC or notebook
N Interfaces: DVI and High Definition Multimedia Interface (HDMI)
N Cordless telephones
N Wireless data systems: Wide Area Network (WAN) and Local Area Network (LAN)
N Personal Digital Assistants (PDAs)