|
PCMF2USB3SZ Datasheet, PDF (1/23 Pages) NXP Semiconductors – Common-mode EMI filter for differential channels with integrated ESD protection | |||
|
PCMFxUSB3S series
Common-mode EMI filter for differential channels with
integrated ESD protection
Rev. 2 â 7 March 2016
Product data sheet
1. Product profile
1.1 General description
Common-mode ElectroMagnetic Interference (EMI) filters with integrated ElectroStatic
Discharge (ESD) protection for one, two and three differential channels. The devices are
designed to provide low insertion loss for differential high-speed signals on each channel
while unwanted common-mode signals are attenuated.
Each differential channel incorporates two signal lines that are coupled by integrated coils.
Diodes provide protection to downstream components from ESD voltages up to ±15 kV on
each signal line.
Table 1. Product overview
Type number
PCMF1USB3S
PCMF2USB3S
PCMF3USB3S
Number of channels
1
2
3
Package Name
WLCSP5
WLCSP10
WLCSP15
1.2 Features and benefits
ï® One, two and three differential channels common-mode EMI filters with integrated
ESD protection
ï® ESD protection up to ±15 kV contact discharge according to IEC 61000-4-2
ï® Superior common-mode suppression over a wide frequency range
ï® Superior RF performance compared to other integrated filters or discrete filters with
external ESD protection
ï® Extremely high symmetry between line pairs
ï® Industry-standard Wafer Level Chip Scale Packages: WLCSP5, 10 and 15 for smaller
footprint
1.3 Applications
ï® Smartphone, cellular and cordless phone
ï® Tablet PC and Mobile Internet Device (MID)
ï® USB 3.1, USB 2.0, HDMI 2.0, HDMI 1.4
ï® MIPI M-PHY and D-PHY as used in Camera Serial Interface (CSI) and Display Serial
Interface (DSI)
ï® General-purpose EMI and Radio-Frequency Interference (RFI) filter and downstream
ESD protection
|
▷ |