|
PCF2119X_10 Datasheet, PDF (1/83 Pages) NXP Semiconductors – LCD controllers/drivers Single-chip LCD controller and driver | |||
|
PCF2119x
LCD controllers/drivers
Rev. 7 â 15 November 2010
Product data sheet
1. General description
The PCF2119x is a low power CMOS1 LCD controller and driver, designed to drive a dot
matrix LCD display of 2-lines by 16 characters or 1-line by 32 characters with 5 Ã 8 dot
format. All necessary functions for the display are provided in a single chip, including
on-chip generation of LCD bias voltages, resulting in a minimum of external components
and lower system current consumption. The PCF2119x interfaces to most
microcontrollers via a 4-bit or 8-bit bus or via the 2-wire I2C-bus. The chip contains a
character generator and displays alphanumeric and kana (Japanese) characters.
The letter âxâ in PCF2119x characterizes the built-in character set. Various character sets
can be manufactured on request. In addition 16 user defined symbols (5 Ã 8 dot format)
are available.
2. Features and benefits
 Single-chip LCD controller and driver
 2-line display of up to 16 characters plus 160 icons or 1-line display of up to
32 characters plus 160 icons
 5 à 7 character format plus cursor; 5 à 8 for kana (Japanese) and user defined
symbols
 Reduced current consumption while displaying icons only
 Icon blink function
 On-chip:
 Configurable 4, 3 or 2 times voltage multiplier generating LCD supply voltage,
independent of VDD, programmable by instruction (external supply also possible)
 Temperature compensation of on-chip generated VLCDOUT: â0.16 %/K to
â0.24 %/K (programmable by instruction)
 Generation of intermediate LCD bias voltages
 Oscillator requires no external components (external clock also possible)
 Display Data RAM (DDRAM): 80 characters
 Character Generator ROM (CGROM): 240 characters (5 à 8)
 Character Generator RAM (CGRAM): 16 characters (5 à 8); 4 characters used to drive
160 icons, 8 characters used if icon blink feature is used in application
 4-bit or 8-bit parallel bus and 2-wire I2C-bus interface
 Manufactured in silicon gate CMOS process
 18 row and 80 column outputs
 Multiplex rates 1:18 (2-line display or 1-line display), 1:9 (for 1-line display of up to
16 characters and 80 icons) and 1:2 (for icon only mode)
1. The definition of the abbreviations and acronyms used in this data sheet can be found in Section 20.
|
▷ |