NTS0102-Q100 Datasheet, PDF(1/21 Page) NXP Semiconductors – Dual supply translating transceiver; open drain; auto direction sensing

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

NTS0102-Q100 Datasheet, PDF (1/21 Pages) NXP Semiconductors – Dual supply translating transceiver; open drain; auto direction sensing

NTS0102-Q100

Dual supply translating transceiver; open drain; auto

direction sensing

Rev. 1 â 27 February 2013

Product data sheet

1. General description

The NTS0102-Q100 is a 2-bit, dual supply translating transceiver with auto direction

sensing, that enables bidirectional voltage level translation. It features two 2-bit

input-output ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A)

and VCC(B)). VCC(A) can be supplied at any voltage between 1.65 V and 3.6 V and VCC(B)

can be supplied at any voltage between 2.3 V and 5.5 V, making the device suitable for

translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and

OE are referenced to VCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin OE

causes the outputs to assume a high-impedance OFF-state. This device is fully specified

for partial power-down applications using IOFF. The IOFF circuitry disables the output,

preventing the damaging backflow current through the device when it is powered down.

This product has been qualified to the Automotive Electronics Council (AEC) standard

Q100 (Grade 1) and is suitable for use in automotive applications.

2. Features and benefits

ï® Automotive product qualification in accordance with AEC-Q100 (Grade 1)

ïµ Specified from ï40 ï°C to +85 ï°C and from ï40 ï°C to +125 ï°C

ï® Wide supply voltage range:

ïµ VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V

ï® Maximum data rates:

ïµ Push-pull: 50 Mbps

ï® IOFF circuitry provides partial Power-down mode operation

ï® Inputs accept voltages up to 5.5 V

ï® ESD protection:

ïµ MIL-STD-883, method 3015 Class 2 exceeds 2500 V for A port

ïµ MIL-STD-883, method 3015 Class 3B exceeds 8000 V for B port

ïµ HBM JESD22-A114E Class 2 exceeds 2500 V for A port

ïµ HBM JESD22-A114E Class 3B exceeds 8000 V for B port

ïµ MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 ï)

ï® Latch-up performance exceeds 100 mA per JESD 78B Class II

ï® Multiple package options

▷