NT2016SA Datasheet, PDF (1/1 Pages) NXP Semiconductors – Temperature-Compensated Crystal Oscillator with AFC Function (VC-TCXO) NT2016S Series

Crystal Oscillator ^NEW
Model Name NT2016SA Temperature-Compensated Crystal Oscillator with AFC Function (VC-TCXO) NT2016S Series
n Main Application
For mobile phones, etc.
n Features
l Supports low power supply voltage. (Supports DC +2.4 V±0.1 V to 2.9 V±0.1 V.)
l Ultra-compact and light with a height, cubic volume, and weight of Max. 0.8 mm,
0.0022 cm³, and 0.008 g, respectively.
l With an AFC (Automatic Frequency Control) function.
l Low power consumption.
l A surface-mount crystal oscillator. (Reflow soldering is possible.)
l Lead-free. Meets the requirements for re-flow profiling using lead-free solder.
Pb
Free
n Specifications
Model
Item
NT2016SA
Standard nominal frequency (MHz)
13 to 26
Supply voltage [VCC] (V)
+2.8
Load
10 kΩ//10 pF
Current consumption (mA)
Max. 1.5
Output voltage
Min. 0.8 V(P-P) (DC Coupling *1)
Frequency stability
Max. ±2.5×10^–6
Operating temperature range (°C)
–30 to +75
Supply variation
Max. ±0.2×10^–6/+2.8 V±5 %
Load variation
Max. ±0.2×10^–6/(10 kΩ//10 pF) ±10 %
Aging
Max. ±1.0×10^–6/year
AFC characteristic
±9.0×10^–6 to ±15.0×10^–6/+1.4 V±1 V *2
• Frequency setting conditions
1. Frequencies are set at normal temperatures (+25±2 °C).
2. Frequencies are set with a printed board that has a
ground pattern attached to the underside of an oscillator.
• If you require a product with a different frequency, power
supply voltage, frequency control characteristic, etc. to the
standard specifications, please contact us with your
enquiries.
• Products with the AFC (Automatic Frequency Control)
function are available. If you require such a product, please
contact us.
*1. A DC-cut capacitor is not embedded in this crystal
oscillator. Connect a DC-cut capacitor (1,000 pF) to the
line-out terminal of the oscillator.
*2. This is a representative specification. The specifications
may change according to the frequency that you request.
n Dimensions
2.0 ± 0.1
#4
#3
#1
#2
1.2 ± 0.05
#1
#2
mm
PAD No.
#1
#2
#3
#4
Connection
VCONT
GND
OUTPUT
VCC
n List of Ordering Codes
Frequency
(MHz)
13
19.2
26
Ordering Code
NT2016SA-13M-NSA3456A
NT2016SA-19.2M-NSA3456A
NT2016SA-26M-NSA3456A
The above frequencies are NDK’ s standard frequencies.
Frequencies other than the above are available.
Feel free to contact our sales representatives.
Reference land pattern
1.2
0.6
#3
#4
0.4 ± 0.1
co09_080926_NT2016SA_e