LPC1769 Datasheet, PDF (1/66 Pages) NXP Semiconductors – 32-bit ARM Cortex-M3 microcontroller; up to 512 kB flash and 64 kB SRAM with Ethernet, USB 2.0 Host/Device/OTG, CAN

LPC1769/68/67/66/65/64
32-bit ARM Cortex-M3 microcontroller; up to 512 kB flash and
64 kB SRAM with Ethernet, USB 2.0 Host/Device/OTG, CAN
Rev. 04 — 1 February 2010
Product data sheet
1. General description
The LPC1769/68/67/66/65/64 are ARM Cortex-M3 based microcontrollers for embedded
applications featuring a high level of integration and low power consumption. The ARM
Cortex-M3 is a next generation core that offers system enhancements such as enhanced
debug features and a higher level of support block integration.
The LPC1768/67/66/65/64 operate at CPU frequencies of up to 100 MHz. The LPC1769
operates at CPU frequencies of up to 120 MHz. The ARM Cortex-M3 CPU incorporates a
3-stage pipeline and uses a Harvard architecture with separate local instruction and data
buses as well as a third bus for peripherals. The ARM Cortex-M3 CPU also includes an
internal prefetch unit that supports speculative branching.
The peripheral complement of the LPC1769/68/67/66/65/64 includes up to 512 kB of flash
memory, up to 64 kB of data memory, Ethernet MAC, USB Device/Host/OTG interface,
8-channel general purpose DMA controller, 4 UARTs, 2 CAN channels, 2 SSP controllers,
SPI interface, 3 I²C-bus interfaces, 2-input plus 2-output I²S-bus interface, 8-channel
12-bit ADC, 10-bit DAC, motor control PWM, Quadrature Encoder interface, four general
purpose timers, 6-output general purpose PWM, ultra-low power Real-Time Clock (RTC)
with separate battery supply, and up to 70 general purpose I/O pins.
The LPC1769/68/67/66/65/64 are pin-compatible to the 100-pin LPC236x ARM7-based
microcontroller series.
2. Features
„ ARM Cortex-M3 processor, running at frequencies of up to 100 MHz
(LPC1768/67/66/65/64) or of up to 120 MHz (LPC1769). A Memory Protection Unit
(MPU) supporting eight regions is included.
„ ARM Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC).
„ Up to 512 kB on-chip flash programming memory. Enhanced flash memory accelerator
enables high-speed 120 MHz operation with zero wait states.
„ In-System Programming (ISP) and In-Application Programming (IAP) via on-chip
bootloader software.
„ On-chip SRAM includes:
‹ 32/16 kB of SRAM on the CPU with local code/data bus for high-performance CPU
access.