LPC1200 Datasheet, PDF (1/2 Pages) NXP Semiconductors – Up to 128 KB Flash and configurable peripherals for industrial control

NXP ARM Cortex-M0™
microcontrollers LPC1200
Up to 128 KB Flash and configurable
peripherals for industrial control
Powered by the smallest, most energy-efficient Cortex-M0 core, the LPC1200 provides compelling
solutions for industrial control. The series includes up to 128 KB Flash and 8 KB SRAM, and offers
configurable peripherals ideally suited for energy-efficient controls and appliances.
Key features
`` ARM Cortex-M0 processor
- U p to 30 MHz CPU frequency with zero wait state from Flash
- Nested Vectored Interrupt Controller (NVIC) supports `
32 vectored interrupts with fast and deterministic latency
- Three reduced-power modes: Sleep, Deep-sleep, and
Deep power-down
`` Memories
- Up to 8 kB SRAM
- Up to 128 kB Flash memory with 512 Byte page erase
`` Serial communication interfaces
- T wo UARTs with fractional baud-rate generation and
internal FIFO plus RS-485, modem, and IrDA supports
- I²C with Fast-mode Plus for twice the devices on one bus
and longer transmission distances
 S SP (SPI) controller with FIFO and multi-protocol capabilities
`` Analog peripherals
- 10-bit Analog-to-Digital Converter (ADC) with eight
channels and conversion rates up to 400 ksps
- Two comparators, each with up to six selectable external
sources, fully configurable on either positive or negative
comparator input channels
`` Other peripherals
- D irect Memory Access (DMA) controller with 21 channels
supports onboard UART, SPI, ADC, RTC, counters/timers,
comparators, I²C, and GPIO
- Cyclic Redundancy Check (CRC) engine with programmable
polynomial settings and support for several CRC standards
- T wo 32-bit general-purpose counter/timers with four
capture inputs and four match outputs
- T wo 16-bit general-purpose counter/timers with two
capture inputs and two match outputs
- W indowed Watchdog Timer (WDT) designed to comply
with IEC 60730 Class B safety requirements
- 3 2-bit Real-time Clock (RTC)
- U p to 55 general-purpose I/O (GPIO) pins, all with
configurators and a digital filter
Applications
`` White goods
`` Industrial control
`` Home automation
`` Power conversion
`` UPS