LPC11C00 Datasheet, PDF (1/2 Pages) NXP Semiconductors – NXP 50-MHz, 32-bit Cortex-M0™ MCUs

NXP 50-MHz, 32-bit
Cortex-M0™ MCUs
LPC11C00
Industry’s first integrated CAN
transceiver microcontroller solution
Offering a low-cost entry point for CAN-based applications, the LPC11C00 series reduce product
development risk, lower total system cost, and speed time-to-market for high-performance
embedded designs.
Key features
} ARM Cortex-M0 processor
- 50 MHz operation
- N ested Vectored Interrupt Controller
- T hree reduced-power modes: Sleep, Deep-sleep, and Deep
power-down
- S erial Wire Debug (4 breakpoints)
} Memories
- 1 6/32 KB Flash memory
- 8 KB SRAM
} Serial peripherals
- C AN 2.0 B C_CAN controller with on-chip CANopen drivers
- O n-chip, high-speed CAN tranceiver
(parts LPC11C22/C24 only)
- U ART with fractional baud rate generation
- 2 SPI controllers with FIFO and multi-protocol capabilities
- I²C-bus interface supporting Fast mode plus
} Analog peripheral
- 1 0-bit analog-to-digital converter with 8 channels and
conversion rates up to 400 K samples per second with
±1LSB DNL
} Timers
- 4 general-purpose counter/timers - Two 32-bit counter/
timers & Two 16-bit counter/timers - with a total of four
capture inputs and 13 (LPC11C12/C14) or 12 (LPC11C22/
C24) match ouputs.
- Programmable Watchdog Timer (WDT) with lock-out feature
- 24-bit System timer
} I/O
- 42 general-purpose I/O (GPIO) pins on the LPC11C12/14 part
- 36 general-purpose I/O (GPIO) pins on the LPC11C22/C24 parts
} Clock generation unit
- 12 MHz Internal RC Oscillator trimmed to 1% accuracy
- Crystal oscillator with an operating range of 1 to 25 MHz
- Programmable watchdog oscillator
- Clock output function
} Other
- Unique device serial number for identification
- Integrated PMU (Power Management Unit) to minimize
- Brownout detect
- Power-On Reset (POR)