|
HEF4027B Datasheet, PDF (1/13 Pages) NXP Semiconductors – Dual JK flip-flop | |||
|
HEF4027B
Dual JK ï¬ip-ï¬op
Rev. 05 â 10 November 2008
Product data sheet
1. General description
The HEF4027B is a edge-triggered dual JK ï¬ip-ï¬op which features independent set-direct
(SD), clear-direct (CD), clock (CP) inputs and outputs (Q, Q). Data is accepted when CP
is LOW, and transferred to the output on the positive-going edge of the clock. The active
HIGH asynchronous clear-direct (CD) and set-direct (SD) inputs are independent and
override the J, K, and CP inputs. The outputs are buffered for best system performance.
Schmitt trigger action makes the clock input highly tolerant of slower rise and fall times.
It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS
(usually ground). Unused inputs must be connected to VDD, VSS, or another input. It is
also suitable for use over the full industrial (â40 °C to +85 °C) temperature range.
2. Features
I Fully static operation
I 5 V, 10 V, and 15 V parametric ratings
I Standardized symmetrical output characteristics
I Operates across the full industrial temperature range â40 °C to +85 °C
I Complies with JEDEC standard JESD 13-B
I ESD protection:
N HBM JESD22-A114E exceeds 2000 V
N MM JESD22-A115-A exceeds 200 V
3. Applications
I Registers
I Counters
I Control circuits
4. Ordering information
Table 1. Ordering information
Tamb from â40 °C to +85 °C.
Type number Package
Name
Description
HEF4027BP DIP16
plastic dual in-line package; 16-leads (300 mil)
HEF4027BT SO16
plastic small outline package; 16 leads; body width 3.9 mm
Version
SOT38-4
SOT109-1
|
▷ |