HEF40098B Datasheet, PDF (1/12 Pages) NXP Semiconductors – 3-state hex inverting buffer

HEF40098B
3-state hex inverting buffer
Rev. 05 — 31 October 2008
Product data sheet
1. General description
The HEF40098B is a hex inverting buffer with 3-state outputs. The 3-state outputs are
controlled by two active LOW enable inputs (1OE and 2OE). A HIGH on 1OE causes four
of the six active LOW buffer elements (1Y0 to 1Y3) to assume a high-impedance or
OFF-state regardless of the other input conditions and a HIGH on 2OE causes the
outputs of the remaining two buffer elements (2Y0 and 2Y1) to assume a high-impedance
or OFF-state regardless of the other input conditions.
It operates over a recommended V_DD power supply range of 3 V to 15 V referenced to V_SS
(usually ground). Unused inputs must be connected to V_DD, V_SS, or another input. It is
also suitable for use over the full industrial (−40 °C to +85 °C) temperature range.
2. Features
I Fully static operation
I 5 V, 10 V, and 15 V parametric ratings
I Standardized symmetrical output characteristics
I Operates across the full industrial temperature range −40 °C to +85 °C
I Complies with JEDEC standard JESD 13-B
I ESD protection:
N HBM JESD22-A114E exceeds 2000 V
N MM JESD22-A115-A exceeds 200 V
3. Applications
I Industrial
4. Ordering information
Table 1. Ordering information
All types operate from −40 °C to +85 °C
Type number Package
Name
Description
HEF40098BP DIP16
plastic dual in-line package; 16-leads (300 mil)
HEF40098BT SO16
plastic small outline package; 16 leads; body width 3.9 mm
Version
SOT38-4
SOT109-1