FRDM-KL82Z Datasheet, PDF (1/18 Pages) NXP Semiconductors – FRDM-KL82Z User’s Guide

Freescale Semiconductor, Inc.
User’s Guide
Document Number: FRDMKL82ZUG
Rev. 0, 01/2016
FRDM-KL82Z User’s Guide
1. Introduction
Contents
1. Introduction........................................................................ 1
The Freescale Freedom development platform is a set of _{1.1. Features................................................................... 2}
software and hardware tools for evaluation and
1.2. Getting started......................................................... 4
development. It is an ideal tool for the rapid prototyping
2.
3.
Contents ............................................................................. 4
FRDM-KL82Z hardware description ................................. 4
of microcontroller-based applications.
3.1. Power supply .......................................................... 4
The FRDM-KL82Z supports the power supply voltage
3.2. Serial and Debugging Adapter version 2
(OpenSDAv2) ....................................................................... 5
ranging from 1.71 V to 3.6 V. It features a KL82Z, a
3.3. Microcontroller ....................................................... 7
device boasting up to 128 KB Flash and 96 KB SRAM,
and numerous analog and digital peripherals. In addition,
3.4. Touch interface ..................................................... 10
3.5. I2C Inertial Sensor: 6-axis accelerometer and
magnetometer...................................................................... 10
it also offers QSPI interface to expand program memory ^{3.6. RGB LED ............................................................. 11}
and USB FS 2.0 without requiring an external crystal.
3.7. Flexio/Camera header ........................................... 12
3.8. Analog reference voltage ...................................... 12
The FRDM-KL82Z includes the Freescale open
3.9. Input/output headers ............................................. 12
4. Jumper table ..................................................................... 14
standard embedded serial and debugging adapter known _{5. Reference Documents ...................................................... 16}
as OpenSDA. This circuit offers the user several options
for serial communications, flash programming, and run
control debugging.
The FRDM-KL82Z hardware provides a broad range of
expansion board options. The MCU operates normally
when the board power is 3.3 V or 1.8 V. The on-board
interfaces include an RGB LED, which works only
when VDD is 3.3 V, a 6-axis digital sensor
(FXOS8700CQ, combining a 3D accelerometer and 3D
magnetometer), two Touch Sensing Interface (TSI)
touch pads.
© 2016 Freescale Semiconductor, Inc. All rights reserved.