DAC1405D750 Datasheet, PDF (1/43 Pages) NXP Semiconductors – Dual 14-bit DAC, up to 750 Msps; 4× and 8× interpolating

DAC1405D750
Dual 14-bit DAC, up to 750 Msps; 4× and 8× interpolating
Rev. 01 — 10 March 2010
Preliminary data sheet
1. General description
The DAC1405D750 is a high-speed 14-bit dual channel Digital-to-Analog Converter
(DAC) with selectable 4× or 8× interpolating filters optimized for multi-carrier wireless
transmitters.
Thanks to its digital on-chip modulation, the DAC1405D750 allows the complex I and Q
inputs to be converted from BaseBand (BB) to IF. The mixing frequency is adjusted via a
Serial Peripheral Interface (SPI) with a 32-bit Numerically Controlled Oscillator (NCO) and
the phase is controlled by a 16-bit register.
Two modes of operation are available: separate data ports or a single interleaved
high-speed data port. In the Interleaved mode, the input data stream is demultiplexed into
its original I and Q data and then latched.
A 4× and 8× clock multiplier enables the DAC1405D750 to provide the appropriate
internal clocks from the internal PLL. The internal PLL can be bypassed enabling the use
of an external high frequency clock. The voltage regulator enables adjustment of the
output full-scale current.
2. Features and benefits
„ Dual 14-bit resolution
„ IMD3: 76 dBc; f_s = 737.28 Msps;
„ 750 Msps maximum update rate
f_o = 140 MHz
„ ACPR: 71 dBc; 2-carrier WCDMA;
f_s = 737.28 Msps; f_o = 153.6 MHz
„ Selectable 4× or 8× interpolation filters „ Typical 1.2 W power dissipation at 4×
interpolation, PLL off and 740 Msps
„ Input data rate up to 185 Msps
„ Power-down and Sleep modes
„ Very low noise cap-free integrated PLL „ Differential scalable output current from
1.6 mA to 22 mA
„ 32-bit programmable NCO frequency „ On-chip 1.25 V reference
„ Dual port or Interleaved data modes „ External analog offset control
(10-bit auxiliary DACs)
„ 1.8 V and 3.3 V power supplies
„ Internal digital offset control
„ LVDS compatible clock
„ Inverse x / (sin x) function
„ Two’s complement or binary offset „ Fully compatible SPI port
data format
„ 1.8 V/3.3 V CMOS input buffers
„ Industrial temperature range from
−40 °C to +85 °C