CBTL06122 Datasheet, PDF (1/19 Pages) NXP Semiconductors – High-performance DisplayPort/PCIe Gen2 hex display multiplexer

CBTL06122
High-performance DisplayPort/PCIe Gen2 hex display
multiplexer
Rev. 02 — 16 April 2009
Product data sheet
1. General description
The CBTL06122 is a six-channel (‘hex’) multiplexer for DisplayPort and PCI Express Gen2
applications. It provides four differential channels capable of switching or multiplexing
(bidirectional and AC-coupled) PCI Express Gen2 or DisplayPort signals, using
high-bandwidth pass-gate technology. Additionally, it provides for switching/multiplexing of
the Hot Plug Detect signal as well as the AUX or DDC (Direct Display Control) signals, for
a total of six channels.
The CBTL06122 is designed for high-performance PCI Express Gen2 and DisplayPort
applications. The device is available in two different pinouts (A and B, orderable as
separate part numbers) to suit different motherboard layout requirements.
The typical application of CBTL06122 is on motherboards, docking stations or add-in
cards where the graphics and I/O system controller chip utilizes I/O pins that are
configurable for either PCI Express or DisplayPort operation. The hex display MUX can be
used in such applications to route the signal from the controller chip to either a physical
DisplayPort connector or a PCI Express connector using its 1 : 2 multiplexer topology. The
controller chip selects which path to use by setting a select signal (which can be latched)
HIGH or LOW.
Optionally, the hex MUX device can be used in conjunction with an HDMI/DVI level shifter
device (PTN3300A, PTN3300B or PTN3301) to allow for DisplayPort as well as HDMI/DVI
connectivity.