CBTL06121 Datasheet, PDF (1/19 Pages) NXP Semiconductors – Gen1 hex display multiplexer

CBTL06121
Gen1 hex display multiplexer
Rev. 01 — 23 May 2008
Product data sheet
1. General description
The CBTL06121 is a six-channel (‘hex’) multiplexer for DisplayPort and PCI Express
applications at Generation 1 (‘Gen1’) speeds. It provides four differential channels capable
of switching or multiplexing (bidirectional and AC-coupled) PCI Express or DisplayPort
signals, using high-bandwidth pass-gate technology. Additionally, it provides for
switching/multiplexing of the Hot Plug Detect signal as well as the AUX or DDC (Direct
Display Control) signals, for a total of six channels.
The CBTL06121 is designed for Gen1 speeds, at 2.5 Gbit/s for PCI Express or 2.7 Gbit/s
for DisplayPort. The device is available in two different pinouts (A and B, orderable as
separate part numbers) to suit different motherboard layout requirements.
The typical application of CBTL06121 is on motherboards, docking stations or add-in
cards where the graphics and I/O system controller chip utilizes I/O pins that are
configurable for either PCI Express or DisplayPort operation. The hex display MUX can be
used in such applications to route the signal from the controller chip to either a physical
DisplayPort connector or a PCI Express connector using its 1 : 2 multiplexer topology. The
controller chip selects which path to use by setting a select signal (which can be latched)
HIGH or LOW.
Optionally, the hex MUX device can be used in conjunction with an HDMI/DVI level shifter
device (PTN3300A, PTN3300B or PTN3301) to allow for DisplayPort as well as HDMI/DVI
connectivity.