ADC1613D Datasheet, PDF (1/43 Pages) NXP Semiconductors – Dual 16-bit ADC; 65 Msps, 80 Msps, 105 Msps or 125 Msps; serial JESD204A interface

ADC1613D series
Dual 16-bit ADC; 65 Msps, 80 Msps, 105 Msps or 125 Msps;
serial JESD204A interface
Rev. 02 — 23 April 2010
Preliminary data sheet
1. General description
The ADC1613D is a dual-channel 16-bit Analog-to-Digital Converter (ADC) optimized for
high dynamic performances and low power at sample rates up to 125 Msps. Pipelined
architecture and output error correction ensure the ADC1613D is accurate enough to
guarantee zero missing codes over the entire operating range. Supplied from a 3.3 V
source for analog and a 1.8 V source for the output driver, it embeds two serial outputs.
Each lane is differential and complies with the JESD204A standard. An integrated Serial
Peripheral Interface (SPI) allows the user to easily configure the ADC. A set of IC
configurations is also available via the binary level control pins taken, which are used at
power-up. The device also includes a SPI programmable full-scale to allow flexible input
voltage range from 1 V to 2 V (peak-to-peak).
Excellent dynamic performance is maintained from the baseband to input frequencies of
170 MHz or more, making the ADC1613D ideal for use in communications, imaging, and
medical applications.
2. Features and benefits
„ SNR, 72.5 dBFS; SFDR, 88 dBc
„ Sample rate up to 125 Msps
„ Clock input divider by 2 for less jitter
contribution
„ 3 V, 1.8 V single supplies
„ Flexible input voltage range:
1 V to 2 V (peak-to-peak)
„ Two configurable serial outputs
„ INL ± 1 LSB; DNL ± 0.5 LSB
„ Pin compatible with the ADC1213D
series
„ HVQFN56 package
„ Input bandwidth, 600 MHz
„ Power dissipation, 995 mW at 80 Msps
„ SPI register programming
„ Duty cycle stabilizer
„ High IF capability
„ Offset binary, two’s complement, gray
code
„ Power-down mode and Sleep mode
„ Compliant with JESD204A serial
transmission standard