ADC1610S125 Datasheet, PDF (1/33 Pages) NXP Semiconductors – Single 16-bit ADC 125 Msps CMOS or LVDS DDR digital outputs

ADC1610S125
Single 16-bit ADC 125 Msps
CMOS or LVDS DDR digital outputs
Rev. 01 — 28 May 2009
Objective data sheet
1. General description
The ADC1610S is a single channel 16-bit Analog-to-Digital Converter (ADC) optimized for
high dynamic performances and low power consumption at a sample rate of 125 Msps.
Pipelined architecture and output error correction ensure the ADC1610S is accurate
enough to guarantee zero missing codes over the entire operating range. Supplied from a
single 3 V source, it can handle output logic levels from 1.8 V to 3.3 V in CMOS mode,
because of a separate digital output supply. It supports the Low Voltage Differential
Signalling (LVDS) Double Data Rate (DDR) output standard. An integrated Serial
Peripheral Interface (SPI) allows the user to easily configure the ADC. The device also
includes a programmable gain amplifier with a flexible input voltage range. With excellent
dynamic performance from the baseband to input frequencies of 170 MHz or more, the
ADC1610S is ideal for use in communications, imaging and medical applications.
2. Features
I SNR, 73 dB
I SFDR, 90 dBc
I Sample rate, 125 Msps
I 16-bit pipelined ADC core
I Single 3 V supply
I Flexible input voltage range: 1 V to 2 V
(p-p) with 6 dB programmable fine gain
I CMOS or LVDS DDR digital outputs
I INL ±4 LSB, DNL ±0.95 LSB (typical)
I Input bandwidth, 600 MHz
I Power dissipation, 570 mW
I SPI Interface
I Duty cycle stabilizer
I Fast OuT-of-Range (OTR) detection
I Offset binary, 2’s complement, gray
code
I Power-down and Sleep modes
I HVQFN40 package
3. Applications
I Wireless and wired broadband communications
I Spectral analysis
I Portable instrumentation
I Ultrasound equipment
I Imaging systems