ADC1005S060 Datasheet, PDF (1/19 Pages) NXP Semiconductors – Single 10 bits ADC, up to 60 MHz

ADC1005S060
Single 10 bits ADC, up to 60 MHz
Rev. 02 — 13 August 2008
Product data sheet
1. General description
The ADC1005S060 is a 10-bit high-speed low-power Analog-to-Digital Converter (ADC)
for professional video and other applications. It converts the analog input signal into 10-bit
binary or gray coded digital words at a maximum sampling rate of 60 MHz. All digital
inputs and outputs are Transistor-Transistor Logic (TTL) and CMOS compatible, although
a low-level sine wave clock input signal is allowed.
The device requires an external source to drive its reference ladder.
2. Features
I 10-bit resolution (binary or gray code)
I Sampling rate up to 60 MHz
I DC sampling allowed
I One clock cycle conversion only
I High signal-to-noise ratio over a large analog input frequency range (9.3 effective bits
at 5 MHz full-scale input at f_clk = 60 MHz)
I No missing codes guaranteed
I In-Range (IR) CMOS output
I TTL and CMOS levels compatible digital inputs
I 2.7 V to 3.6 V CMOS digital outputs
I Low-level AC clock input signal allowed
I External reference voltage regulator
I Power dissipation only 312 mW (typical)
I Low analog input capacitance, no buffer amplifier required
I No sample-and-hold circuit required
3. Applications
I Video data digitizing
I Radar
I Barcode scanners
I Digital instrumentation
I Transient signal analysis
I Σ∆ modulators
I Medical imaging