74LVC2G17-Q100 Datasheet, PDF (1/16 Pages) NXP Semiconductors – Dual non-inverting Schmitt trigger with 5 V tolerant input

74LVC2G17-Q100
Dual non-inverting Schmitt trigger with 5 V tolerant input
Rev. 1 — 7 August 2012
Product data sheet
1. General description
The 74LVC2G17-Q100 provides two non-inverting buffers with Schmitt trigger input. It is
capable of transforming slowly changing input signals into sharply defined, jitter-free
output signals.
Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these
devices as translators in a mixed 3.3 V and 5 V environment.
This device is fully specified for partial power-down applications using I_OFF.
The I_OFF circuitry disables the output, preventing the damaging backflow current through
the device when it is powered down.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
 Automotive product qualification in accordance with AEC-Q100 (Grade 1)
 Specified from 40 C to +85 C and from 40 C to +125 C
 Wide supply voltage range from 1.65 V to 5.5 V
 5 V tolerant input/output for interfacing with 5 V logic
 High noise immunity
 Complies with JEDEC standard:
 JESD8-7 (1.65 V to 1.95 V)
 JESD8-5 (2.3 V to 2.7 V)
 JESD-8B/JESD36 (2.7 V to 3.6 V)
 ESD protection:
 MIL-STD-883, method 3015 exceeds 2000 V
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )
 24 mA output drive (V_CC = 3.0 V)
 CMOS low-power consumption
 Latch-up performance exceeds 250 mA
 Direct interface with TTL levels
 Multiple package options
3. Applications
 Wave and pulse shapers for highly noisy environments