74LVC245A-Q100 Datasheet, PDF (1/16 Pages) NXP Semiconductors – Octal bus transceiver; 3-state

74LVC245A-Q100; 74LVCH245A-Q100
Octal bus transceiver; 3-state
Rev. 1 — 3 September 2012
Product data sheet
1. General description
The 74LVC245A-Q100; 74LVCH245A-Q100 are 8-bit transceivers featuring non-inverting
3-state bus compatible outputs in both send and receive directions. The device features
an output enable (OE) input for easy cascading and a send/receive (DIR) input for
direction control. OE controls the outputs so that the buses are effectively isolated.
Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be
applied to the outputs. These features allow the use of these devices in mixed
3.3 V and 5 V applications.
The 74LVCH245A-Q100 bus hold on data inputs eliminates the need for external pull-up
resistors to hold unused inputs.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
 Automotive product qualification in accordance with AEC-Q100 (Grade 1)
 Specified from 40 C to +85 C and from 40 C to +125 C
 5 V tolerant inputs/outputs for interfacing with 5 V logic
 Wide supply voltage range from 1.2 V to 3.6 V
 CMOS low-power consumption
 Direct interface with TTL levels
 Inputs accept voltages up to 5.5 V
 High-impedance when V_CC = 0 V
 Bus hold on all data inputs (74LVCH245A-Q100 only)
 Complies with JEDEC standard:
 JESD8-7A (1.65 V to 1.95 V)
 JESD8-5A (2.3 V to 2.7 V)
 JESD8-C/JESD36 (2.7 V to 3.6 V)
 ESD protection:
 MIL-STD-883, method 3015 exceeds 2000 V
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )