74LVC1G175GW.125 Datasheet, PDF (1/20 Pages) NXP Semiconductors – Single D-type flip-flop with reset; positive-edge trigger

74LVC1G175
Single D-type flip-flop with reset; positive-edge trigger
Rev. 5 — 6 December 2011
Product data sheet
1. General description
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type
flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q
output.
The master reset (MR) is an asynchronous active LOW input and operates independently
of the clock input. Information on the data input is transferred to the Q output on the
LOW-to-HIGH transition of the clock pulse. The D input must be stable one set-up time
prior to the LOW-to-HIGH clock transition for predictable operation.
The inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of
this device in a mixed 3.3 V and 5 V environment.
This device is fully specified for partial power-down applications using I_OFF. The I_OFF
circuitry disables the output, preventing the damaging backflow current through the device
when it is powered down.
Schmitt trigger action at all inputs makes the circuit highly tolerant of slower input rise and
fall times.
2. Features and benefits
 Wide supply voltage range from 1.65 V to 5.5 V
 5 V tolerant inputs for interfacing with 5 V logic
 High noise immunity
 Complies with JEDEC standard:
 JESD8-7 (1.65 V to 1.95 V)
 JESD8-5 (2.3 V to 2.7 V)
 JESD8B/JESD36 (2.7 V to 3.6 V).
 ESD protection:
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115-A exceeds 200 V.
 24 mA output drive (V_CC = 3.0 V)
 CMOS low power consumption
 Latch-up performance exceeds 250 mA
 Direct interface with TTL levels
 Inputs accept voltages up to 5 V
 Multiple package options
 Specified from 40 C to +85 C and 40 C to +125 C.