74HC366 Datasheet, PDF (1/19 Pages) NXP Semiconductors – Hex buffer/line driver; 3-state; inverting

74HC366; 74HCT366
Hex buffer/line driver; 3-state; inverting
Rev. 03 — 21 November 2006
Product data sheet
1. General description
The 74HC366; 74HCT366 is a high-speed Si-gate CMOS device and is pin compatible
with Low-power Schottky TTL (LSTTL).
The 74HC366; 74HCT366 has six inverting buffer/line drivers with 3-state outputs. The
3-state outputs (nY) are controlled by the output enable inputs (OE1, OE2). A HIGH on
OEn causes the outputs to assume a high-impedance OFF-state.
The 74HC366; 74HCT366 is functionally identical to:
• 74HC365; 74HCT365, but has inverted outputs
2. Features
I Inverting outputs
I Complies with JEDEC standard no. 7A
I ESD protection:
N HBM EIA/JESD22-A114-D exceeds 2000 V
N MM EIA/JESD22-A115-A exceeds 200 V
I Specified from −40 °C to +85 °C and from −40 °C to +125 °C
3. Ordering information
Table 1. Ordering information
Type number Package
Temperature range Name
74HC366
74HC366D −40 °C to +125 °C SO16
74HC366N −40 °C to +125 °C DIP16
74HC366PW −40 °C to +125 °C TSSOP16
74HCT366
74HCT366D −40 °C to +125 °C
74HCT366DB −40 °C to +125 °C
SO16
SSOP16
74HCT366N −40 °C to +125 °C
74HCT366PW −40 °C to +125 °C
DIP16
TSSOP16
Description
Version
plastic small outline package; 16 leads; body width 3.9 mm SOT109-1
plastic dual in-line package; 16 leads (300 mil); long body SOT38-1
plastic thin shrink small outline package; 16 leads; body
width 4.4 mm
SOT403-1
plastic small outline package; 16 leads; body width 3.9 mm SOT109-1
plastic shrink small outline package; 16 leads; body width SOT338-1
5.3 mm
plastic dual in-line package; 16 leads (300 mil); long body SOT38-1
plastic thin shrink small outline package; 16 leads; body
width 4.4 mm
SOT403-1