|
74CBTLV3861 Datasheet, PDF (1/18 Pages) NXP Semiconductors – 10-bit bus switch with output enable | |||
|
74CBTLV3861
10-bit bus switch with output enable
Rev. 3 â 16 December 2011
Product data sheet
1. General description
The 74CBTLV3861 is a 10-bit bus switch with one output enable (OE) input. When OE is
LOW, the switch is closed and port A is connected to the B port. When OE is HIGH, the
switch is disabled.
To ensure the high-impedance OFF-state during power-up or power-down, OE should be
tied to the VCC through a pull-up resistor. The minimum value of the resistor is determined
by the current-sinking capability of the driver.
Schmitt trigger action at control input makes the circuit tolerant to slower input rise and fall
times across the entire VCC range from 2.3 V to 3.6 V.
This device is fully specified for partial power-down applications using IOFF.
The IOFF circuitry disables the output, preventing the damaging backflow current through
the device when it is powered down.
2. Features and benefits
ï® Supply voltage range from 2.3 V to 3.6 V
ï® High noise immunity
ï® Complies with JEDEC standard:
ïµ JESD8-5 (2.3 V to 2.7 V)
ïµ JESD8-B/JESD36 (2.7 V to 3.6 V)
ï® ESD protection:
ïµ HBM JESD22-A114F exceeds 2000 V
ïµ MM JESD22-A115-A exceeds 200 V
ïµ CDM AEC-Q100-011 revision B exceeds 1000 V
ï® 5 ï switch connection between two ports
ï® Rail to rail switching on data I/O ports
ï® CMOS low power consumption
ï® Latch-up performance exceeds 250 mA per JESD78B Class I level A
ï® IOFF circuitry provides partial Power-down mode operation
ï® Multiple package options
ï® Specified from ï40 ï°C to +85 ï°C and ï40 ï°C to +125 ï°C
|
▷ |