74ALVC541 Datasheet, PDF (1/15 Pages) NXP Semiconductors – Octal buffer/line driver; 3-state

74ALVC541
Octal buffer/line driver; 3-state
Rev. 02 — 5 November 2007
Product data sheet
1. General description
The 74ALVC541 is an octal non-inverting buffer/line drivers with 3-state bus compatible
outputs. The 3-state outputs are controlled by the output enable inputs OE0 and OE1.
A HIGH on OEn causes the outputs to assume a high-impedance OFF-state.
2. Features
s Wide supply voltage range from 1.65 V to 3.6 V
s Complies with JEDEC standard:
x JESD8-7 (1.65 V to 1.95 V)
x JESD8-5 (2.3 V to 2.5 V)
x JESD8B/JESD36 (2.7 V to 3.6 V)
s 3.6 V tolerant inputs/outputs
s CMOS low power consumption
s Direct interface with TTL levels (2.7 V to 3.6 V)
s Power-down mode
s Latch-up performance exceeds 250 mA
s ESD protection:
x HBM JESD22-A114E exceeds 2000 V
x MM JESD22-A115-A exceeds 200 V
3. Ordering information
Table 1. Ordering information
Type number Package
Temperature range
74ALVC541D −40 °C to +85 °C
74ALVC541PW −40 °C to +85 °C
74ALVC541BQ −40 °C to +85 °C
Name
SO20
TSSOP20
DHVQFN20
Description
Version
plastic small outline package; 20 leads;
body width 7.5 mm
SOT163-1
plastic thin shrink small outline package; 20 leads; SOT360-1
body width 4.4 mm
plastic dual-in-line compatible thermal enhanced SOT764-1
very thin quad flat package no leads; 20 terminals;
body 2.5 × 4.5 × 0.85 mm